Preparation of carbon nanotube - Toughened alumina composites

被引：0
|
作者：
Yamamoto, G. [1 ]
Omori, M. [2 ]
Hashida, T. [2 ]
机构：
[1] Tohoku Univ, Inst Fluid Sci, Aoba Ku, 6-6-11-707 Aza Aoba, Sendai, Miyagi 9808579, Japan
[2] Tohoku Univ, Fracture & Reliabil Res Inst, Aoba Ku, Sendai, Miyagi 9808579, Japan
来源：
WATER DYNAMICS | 2008年 / 987卷
关键词：
multi-walled carbon nanotube; alumina; mechanical properties;
D O I：
暂无
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
With multi-walled carbon nanotubes (MWCNTs) as reinforcement, MWCNT/alumina composites were prepared at the MWCNTs mass% of 0.5. A flexural strength of 572.1 +/- 28.3 MPa and fracture toughness of 4.80 +/- 0.42 MPa.m(1/2), 1.2 times that of MWCNT-free monolithic alumina prepared under the same processing condition, was achieved. Experimental results showed that the dispersibility of the MWCNTs in the composite was crucially important in order to improve the mechanical properties of the MWCNT/alumina composite material.
引用
收藏
页码：83 / +
页数：2
相关论文
共 50 条
  • [1] Creep in alumina and carbon nanotube reinforced alumina composites
    Gopalan, Hariprasad
    Chokshi, Atul H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 731 : 561 - 568
  • [2] Highly Dispersive Carbon Nanotube/Alumina Composites and their Electrospun Nanofibers
    Lu, Ping
    Huang, Qing
    Jiang, Dongtao
    Ding, Bin
    Hsieh, You-Lo
    Ovid'ko, Ilya A.
    Mukherjee, Amiya
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2009, 92 (11) : 2583 - 2589
  • [3] Hard and tough carbon nanotube-reinforced zirconia-toughened alumina composites prepared by spark plasma sintering
    Echeberria, J.
    Rodriguez, N.
    Vleugels, J.
    Vanmeensel, K.
    Reyes-Rojas, A.
    Garcia-Reyes, A.
    Dominguez-Rios, C.
    Aguilar-Elguezabal, A.
    Bocanegra-Bernal, M. H.
    CARBON, 2012, 50 (02) : 706 - 717
  • [4] A carbon nanotube/alumina network structure for fabricating alumina matrix composites
    He, C. N.
    Tian, F.
    Liu, S. J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 478 (1-2) : 816 - 819
  • [5] A comparison of the effects of multi-wall and single-wall carbon nanotube additions on the properties of zirconia toughened alumina composites
    Bocanegra-Bernal, M. H.
    Echeberria, J.
    Ollo, J.
    Garcia-Reyes, A.
    Dominguez-Rios, C.
    Reyes-Rojas, A.
    Aguilar-Elguezabal, A.
    CARBON, 2011, 49 (05) : 1599 - 1607
  • [6] Sintering of carbon nanotube-reinforced zirconia-toughened alumina composites prepared by uniaxial pressing and cold isostatic pressing
    Reyes-Rojas, A.
    Dominguez-Rios, C.
    Garcia-Reyes, A.
    Aguilar-Elguezabal, A.
    Bocanegra-Bernal, M. H.
    MATERIALS RESEARCH EXPRESS, 2018, 5 (10):
  • [7] Sintering in a graphite powder bed of alumina-toughened zirconia/carbon nanotube composites: a novel way to delay hydrothermal degradation
    Estili, Mehdi
    Echeberria, J.
    Vleugels, J.
    Vanmeensel, K.
    Bondarchuk, Oleksandr B.
    Rodriguez, N.
    Larrimbe, L.
    Reyes-Rojas, A.
    Garcia-Reyes, A.
    Dominguez-Rios, C.
    Bocanegra-Bernal, M. H.
    Aguilar-Elguezabal, A.
    CERAMICS INTERNATIONAL, 2015, 41 (03) : 4569 - 4580
  • [8] Preparation and Properties of Polyphenylene Sulfide/Multiwalled Carbon Nanotube Composites
    Jiang, Zhenyu
    Buchanan, Saul
    McCool, Rauri
    Hornsby, Peter
    Murphy, Adrian
    14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS, 2011, 1353 : 996 - 1001
  • [9] Preparation and characterization of alumina/carbon nanotubes composites
    Yang Qi
    Deng Yi-Da
    Hu Wen-Bin
    CHINESE JOURNAL OF INORGANIC CHEMISTRY, 2007, 23 (12) : 2049 - 2053
  • [10] Tribological and strength properties of alumina/multi-walled carbon nanotube composites
    Yamamoto, G.
    Yokomizo, K.
    Omori, M.
    Aizawa, Y.
    Hashida, T.
    WATER DYNAMICS, 2007, 898 : 154 - +
12345