Study on microstructure and properties of aged Cu-Cr-Zr-Mg-RE alloy

被引:65
作者
Mu, S. G. [1 ,2 ]
Guo, F. A. [1 ]
Tang, Y. Q. [1 ]
Cao, X. M. [1 ]
Tang, M. T. [2 ]
机构
[1] Suzhou Inst Nonferrous Met Proc Technol, Suzhou 215026, Peoples R China
[2] Cent S Univ, Dept Met Sci & Engn, Changsha 410083, Peoples R China
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 475卷 / 1-2期
关键词
Cu-Cr-Zr-Mg-RE alloy; microstructure; properties;
D O I
10.1016/j.msea.2007.04.056
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Electrical conductivity, tensile strength and micro-hardness of Cu-0.43 wt.% Cr-0.17 wt.% Zr-0.05 wt.% Mg-0.1 wt.% RE alloy were investigated after cold working and aging treatment. The results show that good combination of the physical and mechanical properties can be obtained after aging at 450 degrees C for 4 h. The analysis of the microstructure by high resolution transmission electron microscopy (HRTEM) show that three kinds of strengthening phases, such as chromium-rich phase, zirconium-rich phase and the CrCu2(Zr, Mg) particles were observed. Most of the chromium-rich phase and zirconium-rich phase dispersed separately, and few of them congregated together in the matrix. The CrCu2(Zr, Mg) phase may be decomposed into chromium-rich phase and zirconium-rich phase at aging temperature above 450 degrees C. (c) 2007 Published by Elsevier B.V.
引用
收藏
页码:235 / 240
页数:6
相关论文
共 18 条
[1]   Armor and heat sink materials joining technologies development for ITER plasma facing components [J].
Barabash, V ;
Akiba, M ;
Cardella, A ;
Mazul, I ;
Odegard, BC ;
Plöchl, L ;
Tivey, R ;
Vieider, G .
JOURNAL OF NUCLEAR MATERIALS, 2000, 283 :1248-1252
[2]   Precipitation in a Cu-Cr-Zr alloy [J].
Batra, IS ;
Dey, GK ;
Kulkarni, UD ;
Banerjee, S .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 356 (1-2) :32-36
[3]   Microstructure and properties of a Cu-Cr-Zr alloy [J].
Batra, IS ;
Dey, GK ;
Kulkarni, UD ;
Banerjee, S .
JOURNAL OF NUCLEAR MATERIALS, 2001, 299 (02) :91-100
[4]   Material properties and design requirements for copper alloys used in ITER [J].
Davis, JW ;
Kalinin, GM .
JOURNAL OF NUCLEAR MATERIALS, 1998, 258 :323-328
[5]   Influence of composition, heat treatment and neutron irradiation on the electrical conductivity of copper alloys [J].
Eldrup, M ;
Singh, BN .
JOURNAL OF NUCLEAR MATERIALS, 1998, 258 :1022-1027
[6]   The effect of neutron dose, irradiation and testing temperature on mechanical properties of copper alloys [J].
Fabritsiev, SA ;
Pokrovsky, AS ;
Edwards, DJ ;
Zinkle, SJ .
JOURNAL OF NUCLEAR MATERIALS, 1998, 258 :1015-1021
[7]  
FEDOROV VN, 1972, ZH FIZ KHIM+, V46, P181
[8]  
Glazov V M, 1957, IZV AKAD NAUK SSSR O, V9, P123
[9]  
GLAZOV VM, 1956, IZV AKAD NAUK SSSR O, V1, P162
[10]   The precipitation behaviour of ITER-grade Cu-Cr-Zr alloy after simulating the thermal cycle of hot isostatic pressing [J].
Holzwarth, U ;
Stamm, H .
JOURNAL OF NUCLEAR MATERIALS, 2000, 279 (01) :31-45