Shoulder joint kinetics during the push phase of wheelchair propulsion

The purpose of this investigation was to quantify the forces and moments at the shoulder joint during free, level wheelchair propulsion and to document changes imposed by increased speed, inclined terrain, and 15 minutes of continuous propulsion, Data were collected using a six-camera VICON motion analysis system, a strain gauge instrumented wheel, and a wheelchair ergometer, Seventeen men with low level paraplegia participated in this study, Shoulder joint forces and moments were calculated using a three-dimensional model applying the inverse dynamics approach. During free propulsion, peak shoulder joint forces were in the posterior (46 N) and superior directions (14 N), producing a peak resultant force of 51 N at an angle of 185 degrees (180 degrees = posterior), Peak shoulder joint moments were greatest in extension (14 Newton-meters [Nm]), followed by abduction (10 Nm), and internal rotation (6 Nm). With fast and inclined propulsion, peak vertical force increased by greater than 360 %, and the increase in posterior force and shoulder moments ranged from 107% to 167%, At the end of 15 minutes of continuous free propulsion, there were no significant changes compared with short duration free propulsion. The increased joint loads documented during fast and inclined propulsion could lead to compression of subacromial structures against the overlying acromion.