Performance of 2024-T3 aluminium adhesive bonded joints

被引：8
作者：
Pires, I
Quintino, L
Miranda, RM
Miranda, RM
机构：
[1] IDMEC, Lisbon, Portugal
[2] Univ Aberta, Lisbon, Portugal
来源：
MATERIALS AND MANUFACTURING PROCESSES | 2005年 / 20卷 / 02期
关键词：
acid phosphoric anodizing; adhesion; adhesive; adhesive bonding; adhesive failure; bulk adhesive; cohesive failure; corrosion; durability; epoxy; intermetallic compounds; oxide morphologies; single-lap bonded joints; surface treatments; 2024-T3 aluminium alloy;
D O I：
10.1081/AMP-200041848
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Adhesive bonding of aluminium alloys has been investigated due to its growing importance in aeronautic, aerospace, and automotive industries. This paper examines the influences of two pretreatments, alkaline etching and acid pickling, applied singly or in combination with phosphoric acid anodizing on the mechanical behavior of adhesive bonded 2024-T3 aluminium alloy joints, before and after aging by water immersion. The aim of the present study is to investigate the nature of the oxide formed on the aluminium-copper alloy with different surface pretreatments/phosphoric acid anodizing, to analyze the influence of surface features in the durability of bonded joints, the interactions between the oxide and the adhesive, and the influence of water on the mechanical properties of the bulk adhesive, and to understand the phenomena responsible for the degradation of bonded joints.
引用
收藏
页码：175 / 185
页数：11
相关论文
共 50 条
  • [21] Adhesive bonded joints in steel structures
    Ciupack, Yvonne
    Pasternak, Hartmut
    Schiel, Manuel
    Ince, Erdeniz
    [J]. STEEL CONSTRUCTION-DESIGN AND RESEARCH, 2014, 7 (03): : 178 - 182
  • [22] Long-term durability in water of aluminium alloy adhesive joints bonded with epoxy adhesives
    Armstrong, KB
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1997, 17 (02) : 89 - 105
  • [23] Adhesive joints in aluminium alloy structures
    [J]. Soetens, F., 1600, (10):
  • [24] MECHANICAL PERFORMANCE OF ADHESIVE BONDED JOINTS WITH 1C-PUR ADHESIVE AT DIFFERENT ANGLES
    Possa, Desire Coraca
    Petrauski, Alfredo
    Petrauski, Mateus Couri
    dos Santos, Alessandra
    Petrauski, Sandra Maria Ferreira Couri
    Possa, Debora Coraca
    [J]. REVISTA ARVORE, 2024, 48
  • [25] Influence of Low Temperature Cycles on the Ultrasonic Behaviour of Pretreated 2024 T3 Aluminium Joints
    Belloncle, Valentina Vlasie
    Rousseau, Martine
    [J]. ACTA ACUSTICA UNITED WITH ACUSTICA, 2010, 96 (01) : 26 - 31
  • [26] Chromate inhibition of environmentally assisted fatigue crack propagation of aluminium alloy AA 2024-T3 in 3.5% NaCl solution
    Ilman, M. N.
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2014, 62 : 228 - 235
  • [27] On the Performance of Welded, Riveted and Adhesive Bonded Al/Mg Sheet Metal Joints
    Alfanot, Marco
    Ambrogio, Giuseppina
    Filice, Luigino
    Furgiuele, Franco
    Gallus, Enrico
    D'Antuoni, Domenico
    [J]. SHEET METAL 2011, 2011, 473 : 237 - +
  • [28] Corrosion Inhibition of Aluminum Alloy 2024-T3 by Praseodymium Chloride
    Lopez-Garrity, O.
    Frankel, G. S.
    [J]. CORROSION, 2014, 70 (09) : 928 - 941
  • [29] The effect of hygrothermal aging on the adhesion performance of nanomaterial reinforced aluminium adhesive joints
    Ceylan, Reyhan
    Ozun, Elanur
    Coban, Onur
    Bora, M. Ozgur
    Kutluk, Togayhan
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2023, 121
  • [30] Effect of Cro3 Sealing Time on Anodized Al 2024-T3
    Korda, Akhmad A.
    Hidayat, R. Z.
    [J]. 6TH ASIAN PHYSICS SYMPOSIUM, 2016, 739
12345