Influence of electrolyte constituents on corrosion behaviour of PEO coatings on magnesium alloys

被引：21

作者：

Ghasemi, A. ^{[1
]}

Scharnagl, N. ^{[1
]}

Blawert, C. ^{[1
]}

Dietzel, W. ^{[1
]}

Kainer, K. U. ^{[1
]}

机构：

[1] GKSS Forschungszentrum Geesthacht GmbH, Inst Mat Res, D-21502 Geesthacht, Germany

来源：

SURFACE ENGINEERING | 2010年 / 26卷 / 05期

关键词：

Magnesium; Plasma; Coating; Corrosion; Electrolyte; Oxidation; OXIDE CERAMIC COATINGS; MICROARC OXIDATION; ALUMINUM-ALLOYS; PLASMA ELECTROLYSIS; ANODIC FILMS; MG ALLOY; DISCHARGE; AZ91D; RESISTANCE; SILICATE;

D O I：

10.1179/026708408X344671

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

AM50 magnesium alloy is treated by PEO process using four different electrolytes which are combination of K(3)PO(4) and Na(3)PO(4) plus two different hydroxides, i.e. KOH and NaOH. Basic properties of the electrolyte such as pH, conductivity and breakdown voltage were measured. Moreover, coatings were characterised by scanning electron microscopy for the surface morphology and cross sectional study, X-ray diffraction for determination of phase composition and electrochemical impedance spectroscopy (EIS) for evaluation of corrosion resistance. The results indicate that KOH solutions need higher breakdown voltage and result in higher thickness of coatings. The values of the latter parameters are in the range of 150-160 V and 14-17 mu m respectively. While those of NaOH solutions are in the range of 106-116 V and 5-6 mu m thick. The final results show that presence of KOH in the solutions leads to a better corrosion performance of the coating compared to NaOH.

引用

页码：321 / 327

页数：7

共 27 条

[11] Structure and mechanical properties of magnesium alloy treated by micro-arc discharge oxidation using direct current and high-frequency bipolar pulsing modes [J].

Jin, Fanya ;

Chu, Paul K. ;

Xu, Guidong ;

Zhao, Jun ;

Tang, Deli ;

Tong, Honghui .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 435 :123-126

[12] Effects of NaAlO2 on structure and corrosion resistance of microarc oxidation coatings formed on AM60B magnesium alloy in phosphate-KOH electrolyte [J].

Liang, J ;

Guo, BG ;

Tian, J ;

Liu, HW ;

Zhou, JF ;

Liu, WM ;

Xu, T .

SURFACE & COATINGS TECHNOLOGY, 2005, 199 (2-3) :121-126

[13] Systematic study of the electrolytic plasma oxidation process on a Mg alloy for corrosion protection [J].

Ma, Y ;

Nie, X ;

Northwood, DO ;

Hu, H .

THIN SOLID FILMS, 2006, 494 (1-2) :296-301

[14] Corrosion and erosion properties of silicate and phosphate coatings on magnesium [J].

Ma, Y ;

Nie, X ;

Northwood, DO ;

Hu, H .

THIN SOLID FILMS, 2004, 469 :472-477

[15] Abrasive wear/corrosion properties and TEM analysis of Al2O3 coatings fabricated using plasma electrolysis [J].

Nie, X ;

Meletis, EI ;

Jiang, JC ;

Leyland, A ;

Yerokhin, AL ;

Matthews, A .

SURFACE & COATINGS TECHNOLOGY, 2002, 149 (2-3) :245-251

[16] Properties of synthesised oxide ceramic coatings in electrolyte plasma on aluminium alloys [J].

Nykyforchyn, HM ;

Klapkiv, MD ;

Posuvailo, VM .

SURFACE & COATINGS TECHNOLOGY, 1998, 100 (1-3) :219-221

[17] Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology [J].

Sundararajan, G ;

Krishna, LR .

SURFACE & COATINGS TECHNOLOGY, 2003, 167 (2-3) :269-277

[18] Structure and antiwear behavior of micro-arc oxidized coatings on aluminum alloy [J].

Tian, J ;

Luo, ZZ ;

Qi, SK ;

Sun, XJ .

SURFACE & COATINGS TECHNOLOGY, 2002, 154 (01) :1-7

[19] Investigation of plasma electrolytic oxidation processes of magnesium alloy MA2-1 under pulse polarisation modes [J].

Timoshenko, AV ;

Magurova, YV .

SURFACE & COATINGS TECHNOLOGY, 2005, 199 (2-3) :135-140

[20] Formation, structure and composition of anodic films on AM60 magnesium alloy obtained by DC plasma anodising [J].

Verdier, S ;

Boinet, M ;

Maximovitch, S ;

Dalard, F .

CORROSION SCIENCE, 2005, 47 (06) :1429-1444

← 1 2 3 →