Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds

被引：206

作者：

Hosseini, H. Shah ^{[1
]}

Shamanian, M. ^{[1
]}

Kermanpur, A. ^{[1
]}

机构：

[1] Isfahan Univ Technol, Dept Mat Engn, Esfahan 8415683111, Iran

来源：

MATERIALS CHARACTERIZATION | 2011年 / 62卷 / 04期

关键词：

Inconel; 617; AISI 310 austenitic stainless steel; Dissimilar welding; Filler material; ALLOY;

D O I：

10.1016/j.matchar.2011.02.003

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The microstructure and mechanical properties of Inconel 617/310 austenitic stainless steel dissimilar welds were investigated in this work. Three types of filler materials, Inconel 617, Inconel 82 and 310 austenitic stainless steels were used to obtain dissimilar joint using the gas tungsten arc welding process. Microstructural observations showed that there was no evidence of any possible cracking in the weldments achieved by the nickel-base filler materials. The welds produced by 617 and 310 filler materials displayed the highest and the lowest ultimate tensile strength and total elongation, respectively. The impact test results indicated that all specimens exhibited ductile fracture. Among the fillers, Inconel 617 exhibited superlative fracture toughness (205 J). The mechanical properties of the Inconel 617 filler material were much better than those of other fillers. (C) 2011 Elsevier Inc. All rights reserved.

引用

页码：425 / 431

页数：7

共 15 条

[1]

[Anonymous], 2004, WELDING METALLURGY

[2] Microstructural characterization of dissimilar welds between alloy 800 and HP heat-resistant steel [J].

Dehmolaei, R. ;

Shamanian, M. ;

Kermanpur, A. .

MATERIALS CHARACTERIZATION, 2008, 59 (10) :1447-1454

[3]

HOSIER JC, 1972, MET ENG QUART, V12, P51

[4] Effects of filler metal composition on joining properties of alloy 690 weldments [J].

Kuo, TY ;

Lee, HT .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 338 (1-2) :202-212

[5]

Lai GY, 1990, HIGH TEMPERATURE COR, P154

[6] Dissimilar welding of nickel-based alloy 690 to SUS 304L with Ti addition [J].

Lee, HT ;

Jeng, SL ;

Yen, CH ;

Kuo, TY .

JOURNAL OF NUCLEAR MATERIALS, 2004, 335 (01) :59-69

[7]

Lippold JC., 2005, WELDING METALLURGY W

[8] MICROSTRUCTURE AND PHASE-STABILITY OF INCONEL ALLOY 617 [J].

MANKINS, WL ;

HOSIER, JC ;

BASSFORD, TH .

METALLURGICAL TRANSACTIONS, 1974, 5 (12) :2579-2590

[9]

NAFFAKH H, 2008, J MATER PROCESS TECH, P3628

[10]

Nawrocki JG, 2003, WELD J, V82, p25S

← 1 2 →