Deformation behaviour and material properties of austenitic heat-resistant steel X15CrNiSi25-20 subjected to high temperatures and creep

被引：17

作者：

Brnic, Josip ^{[1
]}

Turkalj, Goran ^{[1
]}

Canadija, Marko ^{[1
]}

Krscanski, Sanjin ^{[1
]}

Brcic, Marino ^{[1
]}

Lanc, Domagoj ^{[1
]}

机构：

[1] Fac Engn, Dept Engn Mech, Rijeka 51000, Croatia

来源：

MATERIALS & DESIGN | 2015年 / 69卷

关键词：

Mechanical properties testing; Creep test; Impact behaviour; Steel; MECHANICAL-PROPERTIES; FATIGUE; STRESS;

D O I：

10.1016/j.matdes.2014.12.062

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents experimental results and analysis of the behaviour of heat-resistant austenitic steel (X15CrNiSi25-20) subjected to uniaxial stress at room and high temperatures. The results include stress-strain diagrams as well as creep curves showing the behaviour of material responses to different temperatures. The experimental results of Charpy impact energies provide the ability to asses fracture toughness. On the basis of stress-strain diagrams it is possible to determine ultimate tensile strength, yield strength, modulus of elasticity and total elongation. Also, from creep curves it is possible to analyse material's resistance to creep at considered temperatures. Descriptive error bars relating to mechanical properties are also presented. Finally, the dependence of mechanical properties on strain rate is shown. Experimental results show that this steel is characterised by both high ultimate tensile strength (688 MPa/20 degrees C; 142 MPa/800 degrees C) and yield strength (498 MPa/20 degrees C; 132 MPa/800 degrees C) throughout the range of the investigated temperature field. Its creep resistance at temperatures of 500 degrees C and 600 degrees C may be treated as good if stress levels do not exceed: 280 MPa/500 degrees C and 130 MPa/600 degrees C. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：219 / 229

页数：11

共 33 条

[11] Experimental determination and prediction of the mechanical properties of steel 1.7225 [J].