Electrical Characterization of Schottky Diodes Based on Inkjet-Printed TiO2 Films

被引：10

作者：

Martinez-Lopez, A. G. ^{[1
]}

Padron-Hernandez, W. Y. ^{[2
]}

Pourjafari, D. ^{[2
]}

Oskam, G. ^{[2
]}

Rodriguez-Gattorno, G. ^{[2
]}

Estrada, M. ^{[3
]}

Tinoco, J. C. ^{[1
]}

机构：

[1] Univ Veracruzana, Micro & Nanotechnol Res Ctr, Xalapa 94294, Veracruz, Mexico

[2] CINVESTAV IPN, Appl Phys Dept, Merida 97310, Mexico

[3] CINVESTAV IPN, Solid State Elect Sect, Mexico City 07360, Mexico

来源：

IEEE ELECTRON DEVICE LETTERS | 2018年 / 39卷 / 12期

关键词：

Crystalline phases TiO2; inkjet printing; Schottky diodes;

D O I：

10.1109/LED.2018.2874380

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

TiO2 films have been used for novel sensor devices, thanks to their optical and chemical properties. The development of those applications often requires the features of rectifier devices. In this scenario, TiO2-based Schottky diodes become an interesting alternative. In this letter, a detailed electrical characterization of TiO2-based Schottky diodes is performed. Thin films of the three crystalline phases have been obtained by the inkjet printing technique at room temperature. Thermionic and Poole-Frenkel emission are identified as the main conduction mechanisms in these devices, and the barrier heights are reported for each crystal phase.

引用

页码：1940 / 1943

页数：4

共 50 条

[1] Inkjet-Printed TiO2/Fullerene Composite Films for Planar Perovskite Solar Cells
Huckaba, Aron J.
Garcia-Benito, Ines
Kanda, Hiroyuki
Shibayama, Naoyuki
Oveisi, Emad
Nazeeruddin, Mohammad K.
HELVETICA CHIMICA ACTA, 2020, 103 (05)
[2] Nanopaper-Based Organic Inkjet-Printed Diodes
Conti, Silvia
Martinez-Domingo, Carme
Lay, Makara
Teres, Lluis
Vilaseca, Fabiola
Ramon, Eloi
ADVANCED MATERIALS TECHNOLOGIES, 2020, 5 (06)
[3] Inkjet printed highly porous TiO2 films for improved electrical properties of photoanode
Bernacka-Wojcik, I.
Wojcik, P. J.
Aguas, H.
Fortunato, E.
Martins, R.
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2016, 465 : 208 - 214
[4] The fabrication and characterization of inkjet-printed polyaniline nanoparticle films
Morrin, Aoife
Ngamna, Orawan
O'Malley, Eimer
Kent, Nigel
Moulton, Simon E.
Wallace, Gordon G.
Smyth, Malcolm R.
Killard, Anthony J.
ELECTROCHIMICA ACTA, 2008, 53 (16) : 5092 - 5099
[5] Preparation, characterisation and sensing application of inkjet-printed nanostructured TiO2 photoanode
Yang, Min
Li, Lihong
Zhang, Shanqing
Li, Guiying
Zhao, Huijun
SENSORS AND ACTUATORS B-CHEMICAL, 2010, 147 (02): : 622 - 628
[6] Ultrasound assisted preparation of stable water-based nanocrystalline TiO2 suspensions for photocatalytic applications of inkjet-printed films
Fasaki, I.
Siamos, K.
Arin, M.
Lommens, P.
Van Driessche, I.
Hopkins, S. C.
Glowacki, B. A.
Arabatzis, I.
APPLIED CATALYSIS A-GENERAL, 2012, 411 : 60 - 69
[7] Inkjet-printed, self-aligned organic Schottky diodes on imprinted plastic substrates
Cao, Motao
Hyun, Woo Jin
Francis, Lorraine F.
Frisbie, C. Daniel
FLEXIBLE AND PRINTED ELECTRONICS, 2020, 5 (01):
[8] Fabrication and Characterization of Cytocompatible Polypyrrole Films Inkjet Printed from Nanoformulations Cytocompatible, Inkjet-Printed Polypyrrole Films
Weng, Bo
Liu, Xiao
Higgins, Michael J.
Shepherd, Roderick
Wallace, Gordon
SMALL, 2011, 7 (24) : 3434 - 3438
[9] Development, characterization, and processing of thin and thick inkjet-printed dielectric films
Tehrani, Bijan K.
Mariotti, Chiara
Cook, Benjamin S.
Roselli, Luca
Tentzeris, Manos M.
ORGANIC ELECTRONICS, 2016, 29 : 135 - 141
[10] Inkjet-Printed Mesoporous TiO2 and Perovskite Layers for High Efficiency Perovskite Solar Cells
Huckaba, Aron J.
Lee, Yonghui
Xia, Rui
Paek, Sanghyun
Bassetto, Victor Costa
Oveisi, Emad
Lesch, Andreas
Kinge, Sachin
Dyson, Paul J.
Girault, Hubert
Nazeeruddin, Mohammad Khaja
ENERGY TECHNOLOGY, 2019, 7 (02) : 317 - 324

← 1 2 3 4 5 →