Fatigue failure behavior of glass/epoxy ±55 filament wound pipes under internal pressure

被引：89
作者：
Tarakçioglu, N
Gemi, L
Yapici, A [1 ]
机构：
[1] Selcuk Univ, Dept Mech Engn, TR-42075 Konya, Turkey
[2] Selcuk Univ, Tech Educ Fac, TR-42075 Konya, Turkey
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2005年 / 65卷 / 3-4期
关键词：
fatigue; filament winding;
D O I：
10.1016/j.compscitech.2004.10.002
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
In this study, fatigue behavior of filament wound composite pipes under alternating internal pressure has been investigated. GRP pipes which made of E-glass/epoxy are tested under open ended conditions. Test specimens have four layers which have +/-55degrees winding angle. Tests have been done in accordance with ASTM D-2992. This standards offers 0.42 Hz frequency and R = 0.05 stress ratio. Tests have been performed at different load levels from 30% to 70% of ultimate strength. Whitening, leakage and final failure levels of GRP pipes have been observed. Fatigue results are presented and interpreted by means of S-N curves. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码：703 / 708
页数：6
相关论文
共 50 条
[41]   Seawater effect on impact behavior of glass-epoxy composite pipes [J].
Deniz, Mehmet Emin ;
Karakuzu, Ramazan .
COMPOSITES PART B-ENGINEERING, 2012, 43 (03) :1130-1138
[42]   Fatigue behavior of graphene nanoplatelets reinforced and unreinforced basalt/epoxy composite pressure vessels subjected to low-velocity impact under internal pressure [J].
Sepetcioglu, Harun ;
Tarakcioglu, Necmettin .
JOURNAL OF COMPOSITE MATERIALS, 2021, 55 (29) :4361-4373
[43]   Tensile behavior of filament-wound glass reinforced elastomeric tubes [J].
Bakis, CE ;
Orlet, MW .
BRIDGING THE CENTURIES WITH SAMPE'S MATERIALS AND PROCESSES TECHNOLOGY, VOL 45, BOOKS 1 AND 2, 2000, :1407-1416
[44]   On the role of cooling on fatigue failure of a woven glass/epoxy laminate [J].
Kahirdeh, A. ;
Naderi, M. ;
Khonsari, M. M. .
JOURNAL OF COMPOSITE MATERIALS, 2013, 47 (15) :1803-1816
[45]   Estimating S-N curves for local fiber dominated fatigue failure in ring specimens representing filament wound pressure vessels with damage [J].
Hugaas, Eivind ;
Echtermeyer, Andreas T. .
COMPOSITES PART C: OPEN ACCESS, 2021, 5
[46]   Carbon/epoxy filament wound composite drive shafts under torsion and compression [J].
Filho, Paulo Stedile ;
Almeida, Jose Humberto S., Jr. ;
Amico, Sandro C. .
JOURNAL OF COMPOSITE MATERIALS, 2018, 52 (08) :1103-1111
[47]   Optimal design of filament wound type 3 tanks under internal pressure using a modified genetic algorithm [J].
Kim, CU ;
Hong, CS ;
Kim, CG ;
Kim, JY .
COMPOSITE STRUCTURES, 2005, 71 (01) :16-25
[48]   Optimal design of filament wound structures under internal pressure based on the semi-geodesic path algorithm [J].
Kim, CU ;
Kang, JH ;
Hong, CS ;
Kim, CG .
COMPOSITE STRUCTURES, 2005, 67 (04) :443-452
[49]   FATIGUE BEHAVIOR OF UNNOTCHED AND NOTCHED WOVEN GLASS/EPOXY LAMINATES [J].
XIAO, JY ;
BATHIAS, C .
COMPOSITES SCIENCE AND TECHNOLOGY, 1994, 50 (02) :141-148
[50]   Comparison between analytical and experimental failure behavior of a proposed design for the filament-wound composite pressure vessels [J].
Azzam, BS ;
Muhammad, MAA ;
Mokhtar, MOA ;
Kolkailah, FA .
CURRENT ADVANCES IN MECHANICAL DESIGN AND PRODUCTION VI, 1996, :323-332
12345