Fatigue failure behavior of glass/epoxy ±55 filament wound pipes under internal pressure

被引：88

作者：

Tarakçioglu, N

Gemi, L

Yapici, A ^{[1
]}

机构：

[1] Selcuk Univ, Dept Mech Engn, TR-42075 Konya, Turkey

[2] Selcuk Univ, Tech Educ Fac, TR-42075 Konya, Turkey

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2005年 / 65卷 / 3-4期

关键词：

fatigue; filament winding;

D O I：

10.1016/j.compscitech.2004.10.002

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

In this study, fatigue behavior of filament wound composite pipes under alternating internal pressure has been investigated. GRP pipes which made of E-glass/epoxy are tested under open ended conditions. Test specimens have four layers which have +/-55degrees winding angle. Tests have been done in accordance with ASTM D-2992. This standards offers 0.42 Hz frequency and R = 0.05 stress ratio. Tests have been performed at different load levels from 30% to 70% of ultimate strength. Whitening, leakage and final failure levels of GRP pipes have been observed. Fatigue results are presented and interpreted by means of S-N curves. (C) 2004 Elsevier Ltd. All rights reserved.

引用

页码：703 / 708

页数：6

共 50 条

[21] The behavior of multidirectional filament wound fibreglass/epoxy tubulars under biaxial loading
Ellyin, F
Carroll, M
Kujawski, D
Chiu, AS
[J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1997, 28 (9-10) : 781 - 790
[22] Experimental and theoretical investigations on the failure of filament wound GRP pipes
Rafiee, Roham
[J]. COMPOSITES PART B-ENGINEERING, 2013, 45 (01) : 257 - 267
[23] Progressive Fatigue Failure Analysis of a Filament Wound Ring Specimen with a Hole
Hugaas, Eivind
Vedvik, Nils Petter
Echtermeyer, Andreas T.
[J]. JOURNAL OF COMPOSITES SCIENCE, 2021, 5 (09):
[24] Evaluating the effectiveness of nanofillers in filament wound carbon/epoxy multiscale composite pipes
Ustun, Tugay
Ulus, Hasan
Karabulut, Salim Egemen
Eskizeybek, Volkan
Sahin, Omer Sinan
Avci, Ahmet
Demir, Okan
[J]. COMPOSITES PART B-ENGINEERING, 2016, 96 : 1 - 6
[25] Enhancing Fatigue Life of Filament Winding Laminar and Curved Pipes Containing Carbon Nanotubes, and Their Fatigue Failure
Tasyurek, Mustafa
Tarakcioglu, Necmettin
[J]. POLYMERS & POLYMER COMPOSITES, 2017, 25 (02) : 167 - 176
[26] ELASTIC RESPONSE OF FILAMENT-WOUND ARTERIAL PROSTHESES UNDER INTERNAL-PRESSURE
HELLENER, G
COHN, D
MAROM, G
[J]. BIOMATERIALS, 1994, 15 (14) : 1115 - 1121
[27] Fatigue behavior of steel pipes containing idealized flaws under fluctuating pressure
Hagiwara, N
Mézière, Y
Oguchi, N
Zaréa, M
Champavère, R
[J]. JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 1999, 42 (04): : 610 - 617
[28] Tensile failure of filament-wound pipes under long-term creep loading: A probabilistic analysis
Ferry, L
Perreux, D
Varchon, D
Le Bras, J
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 1997, 57 (9-10) : 1281 - 1288
[29] The effect of frequency on the fatigue performance of filament-wound pipes under biaxial loading: Experimental results and damage model
Perreux, D
Joseph, E
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 1997, 57 (03) : 353 - 364
[30] Hoop tensile and compression behavior of glass-carbon intraply hybrid fiber reinforced filament wound composite pipes
Ozbek, Ozkan
Bozkurt, Omer Yavuz
[J]. MATERIALS TESTING, 2019, 61 (08) : 763 - 769

← 1 2 3 4 5 →