Method to Increase Ultimate Bearing Capacity of Skirted Circular Footing

被引:2
|
作者
Renaningsih [1 ]
Satria, Isvan Fajar [1 ]
Susanto, Agus [1 ]
Listyawan, Anto Budi [1 ]
机构
[1] Univ Muhammadiyah Surakarta, Civil Engn Dept, Jl Ahmad Yani Tromol Pos 1 Pabelan Kartasura, Surakarta, Indonesia
来源
GREEN PROCESS, MATERIAL, AND ENERGY: A SUSTAINABLE SOLUTION FOR CLIMATE CHANGE | 2017年 / 1855卷
关键词
D O I
10.1063/1.4985458
中图分类号
O59 [应用物理学];
学科分类号
摘要
Bearing capacity is the most important factor in designing foundation. It is necessary to find a method to improve the bearing capacity. Skirts that are attached on the below of footing can be used as an alternative of the improvement. The method is implemented to improve the bearing capacity of shallow footing on sand soil. The aim of this study was to find the effect of additional skirt on the circular footing towards the bearing capacity of soil and towards the settlement. This study performed twelve laboratory experiments on steel circular footing with various diameters and skirt lengths. In addition, the type of soil used in this study was sand soil in which the formation of water content and compaction method was maintained. The laboratory tests indicated that skirts are very effective to improve the ultimate bearing capacity, as they can increase the length hence the ultimate bearing capacity can be enhanced by 4.70 times in certain study condition. Skirts are also capable to reduce the settlement. In general, the analysis on the same value of load of 2.00 kN indicated the decrease of the settlement is in accordance with the increase of the skirt length attached on the circular footing.
引用
收藏
页数:8
相关论文
共 50 条
  • [41] Probabilistic bearing capacity of circular footing on spatially variable undrained clay
    Choudhuri, Kouseya
    Chakraborty, Debarghya
    GEOMECHANICS AND ENGINEERING, 2024, 38 (01) : 93 - 106
  • [42] Depth factors for undrained bearing capacity of circular footing by numerical approach
    Sadok Benmebarek
    Insaf Saifi
    Naima Benmebarek
    Journal of Rock Mechanics and Geotechnical Engineering, 2017, 9 (04) : 761 - 766
  • [43] Limit analysis of bearing capacity for a circular footing subjected to eccentric loads
    Sekiguchi, H
    Kobayashi, S
    FOURTEENTH INTERNATIONAL CONFERENCE ON SOIL MECHANICS AND FOUNDATION ENGINEERING, VOL 2, 1997, : 1029 - 1032
  • [44] Numerical analysis of bearing capacity of circular footing reinforced with geogrid layers
    Ali Abdolhosseinzadeh
    Pijush Samui
    Masoud Samaei
    Aria Garousi
    Arabian Journal of Geosciences, 2022, 15 (8)
  • [45] Bearing capacity of strip and circular footing on layered sand with geogrid at the interface
    Pragyan Paramita Das
    Vishwas N. Khatri
    Jyant Kumar
    Arabian Journal of Geosciences, 2022, 15 (4)
  • [46] Depth factors for undrained bearing capacity of circular footing by numerical approach
    Benmebarek, Sadok
    Saifi, Insaf
    Benmebarek, Naima
    JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING, 2017, 9 (04) : 761 - 766
  • [47] A method for calculating vertical pullout ultimate bearing capacity of shallow circular anchor plate
    Hu Wei
    Meng Jian-wei
    Yao Chen
    Lei Yong
    ROCK AND SOIL MECHANICS, 2020, 41 (09) : 3049 - 3055
  • [48] Centrifuge study of the bearing capacity increase of a shallow footing due to preloading
    Bienen, B.
    Gaudin, C.
    Cassidy, M. J.
    PHYSICAL MODELLING IN GEOTECHNICS, VOLS. 1 AND 2, 2010, : 1019 - 1024
  • [49] Behavior of circular skirted footing on gypseous soil subjected to water infiltration
    Aljuari, Khawla A.
    Fattah, Mohammed Y.
    Alzaidy, Mohammed N. J.
    JOURNAL OF THE MECHANICAL BEHAVIOR OF MATERIALS, 2023, 32 (01)
  • [50] ULTIMATE BEARING CAPACITY OF STRIP FOOTING ON SAND UNDERLAIN BY CLAY UNDER INCLINED LOAD
    Dutta, Rakesh Kumar
    Khatri, Vishwas Nandkishor
    Kaundal, Nitesh
    CIVIL AND ENVIRONMENTAL ENGINEERING REPORTS, 2022, 32 (01) : 116 - 137