Sliding Wear Properties of Ti/TiC Surface Composite Layer Formed by Laser Alloying

被引：6

作者：

Yamaguchi, Takuto ^{[1
]}

Hagino, Hideki ^{[1
]}

Michiyama, Yasuhiro ^{[1
]}

Nakahira, Atsushi ^{[2
]}

机构：

[1] Technol Res Inst Osaka Prefecture, Izumi 5941157, Japan

[2] Osaka Prefecture Univ, Dept Mat Sci, Sakai, Osaka 5998531, Japan

来源：

MATERIALS TRANSACTIONS | 2015年 / 56卷 / 03期

关键词：

laser alloying; surface modification; titanium; titanium carbide; wear property; TITANIUM; COATINGS;

D O I：

10.2320/matertrans.M2014330

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Titanium and its alloys have various excellent properties, such as good corrosion resistance and high specific strength. Yet the poor tribological properties of these materials have so far precluded their application to sliding parts under severe wear conditions. Laser alloying is an effective process for improving wear resistance. This study was conducted to investigate the wear properties of Ti/TiC surface composite layer formed by laser alloying process of CP-Ti using graphite powder. Wear testing of the composite layer was carried out using a ball-on-flat type reciprocating wear tester. A hardened steel ball for bearing use and an Al2O3 ball were used as counterface materials for the wear testing. The tests with the steel ball revealed preferential wearing of the hardened steel, with no observable scarring the Ti/TiC composite. In the tests with the Al2O3 ball, the wear scar on the Ti/TiC composite layer was deeper than the wear scar on a non-laser irradiated substrate.

引用

页码：361 / 366

页数：6

共 15 条

[1] [Anonymous], 1992, ASM HDB, V18, P29
[2] TRIBOLOGICAL PROPERTIES OF TITANIUM-ALLOYS
BUDINSKI, KG
[J]. WEAR, 1991, 151 (02) : 203 - 217
[3] LASER SURFACE ALLOYING - A BIBLIOGRAPHY
DRAPER, CW
EWING, CA
[J]. JOURNAL OF MATERIALS SCIENCE, 1984, 19 (12) : 3815 - 3825
[4] THE STRUCTURE OF TI-6AL-4V LASER SURFACE ALLOYED WITH CARBON
FLOWER, HM
WALKER, A
WEST, DRF
[J]. SCRIPTA METALLURGICA, 1985, 19 (08): : 923 - 926
[5] Microstructure and wear resistance of CP titanium laser alloyed with a mixture of reactive gases
Grenier, M
Dube, D
Adnot, A
Fiset, M
[J]. WEAR, 1997, 210 (1-2) : 127 - 135
[6] MATERIAL SELECTION FOR HARD COATINGS
HOLLECK, H
[J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1986, 4 (06): : 2661 - 2669
[7] A FUNDAMENTAL TRIBOLOGICAL STUDY OF TI/AL2O3 CONTACT IN SLIDING WEAR
HONG, H
WINER, WO
[J]. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1989, 111 (03): : 504 - 509
[8] FRICTION AND ADHESIVE WEAR OF TITANIUM CARBIDE AND TITANIUM NITRIDE OVERLAY COATINGS
JAMAL, T
NIMMAGADDA, R
BUNSHAH, RF
[J]. THIN SOLID FILMS, 1980, 73 (02) : 245 - 254
[9] Damage processes and substrate surface design for CVD diamond films
Kameoka, S
Motonishi, S
Uchida, H
[J]. SURFACE & COATINGS TECHNOLOGY, 2003, 169 : 316 - 320
[10] Nakata K., 1994, J JPN WELD SOC, V63, P273

← 1 2 →