Wear and friction analysis of cubic boron nitride tools with different binders in high-speed turning of nickel-based superalloys

被引：29

作者：

Tu, Luqiang ^{[1
]}

Deng, Yadi ^{[2
]}

Zheng, Tianchang ^{[3
]}

Han, Lei ^{[3
]}

An, Qinglong ^{[1
]}

Ming, Weiwei ^{[1
]}

Chen, Ming ^{[1
]}

机构：

[1] Shanghai Jiao Tong Univ, Sch Mech Engn, State Key Lab Mech Syst & Vibrat, Shanghai 200240, Peoples R China

[2] Dongfang Turbine Co Ltd, Deyang 618000, Sichuan, Peoples R China

[3] Shanghai Elect Power Generat Equipment Co Ltd, Turbine Plant, Shanghai 200240, Peoples R China

来源：

TRIBOLOGY INTERNATIONAL | 2022年 / 173卷

关键词：

Nickel-based superalloys; Cubic boron nitride; Tool wear; Tool flank temperature; THERMAL-CONDUCTIVITY; INCONEL; 718; RESIDUAL-STRESS; MECHANISMS; ALLOYS; DRY; MACHINABILITY; PERFORMANCE; PREDICTION; TI-6AL-4V;

D O I：

10.1016/j.triboint.2022.107659

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Nickel-based superalloy is an attractive material as turbine engine components in aerospace industry, but low machining efficiency and poor machinability have further hindered it to be widely employed in potential applications. Cubic boron nitride (cBN), possessing extreme hardness and chemical inertness, is the potential candidate as tools to machine superalloys. In this work, we attempt to explain the disparities in wear and friction behaviors of various-binder cBN tools by performing high-speed turning Inconel 718. Tool wears both the rake face and flank face are systematically analyzed. Friction coefficients between cBN and Inconel 718 were determined. Tool flank temperature distributions with different flank wear (VB) were visually presented by FEM simulations.

引用

页数：32

共 50 条

[41] Plastic Deformation and Residual Stress in High Speed Turning of AD730™ Nickel-based Superalloy with PCBN and WC Tools
Chen, Z.
Zhou, J. M.
Peng, R. L.
M'Saoubi, R.
Gustafsson, D.
Palmert, F.
Moverare, J.
4TH CIRP CONFERENCE ON SURFACE INTEGRITY (CSI 2018), 2018, 71 : 440 - 445
[42] High-Temperature Friction and Wear Features of Nickel-Based Single Crystal Superalloy
Lei Li
Kun He
Shouyi Sun
Weizhu Yang
Zhufeng Yue
Huan Wan
Tribology Letters, 2020, 68
[43] Flank wear and rake wear studies for arc enhanced HiPIMS coated AlTiN tools during high speed machining of nickel-based superalloy
Singh, Abhishek
Ghosh, S.
Aravindan, S.
SURFACE & COATINGS TECHNOLOGY, 2020, 381
[44] Investigation on the thermal-mechanical coupling effect on wear mechanism of high-speed cutting nickel-based superalloy GH4169 with cermet cutting tools
Li, Donghui
Zhang, Tao
Zhao, Nan
Dong, Longlong
Wu, Mengqi
Li, Guohe
Li, Aimin
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024,
[45] Adhering layer formation and its effect on the wear of coated carbide tools during turning of a nickel-based alloy
Xue, Chao
Chen, Wuyi
WEAR, 2011, 270 (11-12) : 895 - 902
[46] Experimental study of single cubic boron nitride grains in the ultrasound-assisted high-speed grinding
Xiang, Dao-hui
Liu, Zhong-yun
Zhou, Zhi-kun
Yao, Yun-long
ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (02):
[47] Tool Wear Mechanism and Grinding Performance for Different Cooling-Lubrication Modes in Grinding of Nickel-Based Superalloys
Liang, Chunyou
Gong, Yadong
Zhou, Linhu
Qi, Yang
Zhang, Huan
Zhao, Jibin
MATERIALS, 2023, 16 (09)
[48] Microstructural Analysis on Grain Boundary of Boron- and Zirconium-Containing Wrought Nickel-Based Superalloys
Kang, Byungil
Lee, Youngki
Kim, Jongmin
Ha, Taekyu
Kim, Youngjig
CRYSTALS, 2024, 14 (03)
[49] Performance and wear mechanisms of coated PCBN tools in high-speed turning superalloy GH4202
Wang, Zhanghao
Wang, Yongguo
Lv, Dejin
Yu, Xin
Gao, Yuan
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 127 (11-12): : 5083 - 5097
[50] Performance and wear mechanisms of coated PCBN tools in high-speed turning superalloy GH4202
Zhanghao Wang
Yongguo Wang
Dejin Lv
Xin Yu
Yuan Gao
The International Journal of Advanced Manufacturing Technology, 2023, 127 : 5083 - 5097

← 1 2 3 4 5 →