Residual stress profile in ceramic laminates

被引：0

作者：

Ortolani, M. ^{[1
]}

Leoni, M. ^{[1
]}

Scardi, P. ^{[1
]}

Golshan, M. ^{[2
]}

机构：

[1] Univ Trent, Dept Mat Eng & Ind Technol, I-38050 Trento, Italy

[2] CCLRC Daresbury Lab Daresbury, Warrington WA4 4AD, Cheshire, England

来源：

ZEITSCHRIFT FUR KRISTALLOGRAPHIE | 2007年

关键词：

residual stress; ceramic laminates; residual stress gradient;

D O I：

暂无

中图分类号：

O7 [晶体学];

学科分类号：

0702 ; 070205 ; 0703 ; 080501 ;

摘要：

Tape casting followed by high temperature compaction and sintering can be used for the production of ceramic laminates with a very high fracture toughness compared to their bulk counterpart. These enhanced properties can be obtained by Suitable choice of the layers to be co-sintered in order to obtain a particular residual stress profile in the final corriportent. The stress profile can be accurately measured by ineans of synchrotron radiation diffraction in energy-dispersive fixed-gauge-volurne serup. The data for a set of alumina/zirconia/mullite laminates of ca. 1mm thickness, made of layers as thin as ca. 40 mu m are here presented and the results compared with theoretical predictions. In addition to the average stress profile, diffraction allowed to establish the stress in each of the different phases constituting the layers, thus showing coupling between the grains present therein.

引用

页码：91 / 96

页数：6

共 8 条

[1]

[Anonymous], 2004, Diffraction Analysis of the Microstructure of Materials

[2]

BERTOLDI M, 2004, HIGH RELIABILITY CER

[3] A SIMPLE WAY TO MAKE TOUGH CERAMICS [J].

CLEGG, WJ ;

KENDALL, K ;

ALFORD, NM ;

BUTTON, TW ;

BIRCHALL, JD .

NATURE, 1990, 347 (6292) :455-457

[4]

Green D.J., 1998, INTRO MECH PROPERTIE

[5]

Lawn B., 1993, FRACTURE BRITTLE SOL

[6]

Noyan I. C., 1987, Residual Stress. Measurements by Diffraction and Interpretation

[7] DESIGN OF A LAMINATED CERAMIC COMPOSITE FOR IMPROVED STRENGTH AND TOUGHNESS [J].

RUSSO, CJ ;

HARMER, MP ;

CHAN, HM ;

MILLER, GA .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1992, 75 (12) :3396-3400

[8] Tailored residual stresses in high reliability alumina-mullite ceramic laminates [J].

Sglavo, VM ;

Paternoster, M ;

Bertoldi, M .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (10) :2826-2832

← 1 →