Improving structural, tribological and electrochemical properties of Ti6Al4V alloy with B-doped TiO2 thin films

被引:37
作者
Celik, A. [1 ]
Acar, M. T. [1 ]
Yetim, T. [2 ]
Kovaci, H. [1 ]
Yetim, A. F. [3 ]
机构
[1] Ataturk Univ, Fac Engn, Dept Mech Engn, Erzurum, Turkey
[2] Erzurum Tech Univ, Fac Engn & Architecture, Dept Chem Engn, Erzurum, Turkey
[3] Erzurum Tech Univ, Fac Engn & Architecture, Dept Mech Engn, Erzurum, Turkey
关键词
TiO2; Ceramic coating; B-doping; Wear; Friction; Corrosion; BORON-NITRIDE NANOTUBES; PHOTOCATALYTIC ACTIVITY; STAINLESS-STEEL; SLIDING WEAR; CORROSION; SOL; TITANIUM; BIOCOMPATIBILITY; BEHAVIOR; TEMPERATURE;
D O I
10.1016/j.triboint.2020.106210
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
B-doped TiO2 coatings with different B:Ti molar ratios were produced on Ti6Al4V alloy by a sol-gel dip-coating in order to improve tribological and electrochemical properties of Ti6Al4V. The properties of films were evaluated by XRD, XPS, SEM, surface tension-meter, tribotester and EIS. The highest roughness and hardness were obtained from B:Ti molar ratio of 2:1 TiO2 thin-film. TiO2 and B-doped TiO2 improved the wear resistance. While the mean CoF of Ti6Al4V was 0.39, TiO2 films reduced CoF significantly. B-doped TiO2 showed higher wear resistance than substrate and TiO2 film. Corrosion resistance was enhanced by TiO2 and the increasing B molar ratio provided improvement. The surface state changed after coatings. While TiO2 film showed hydrophobic behavior, B-doped all films exhibited hydrophilic characteristics.
引用
收藏
页数:10
相关论文
共 45 条
[1]   Evaluation of nanostructured S-doped TiO2 thin films and their photoelectrochemical application as photoanode for corrosion protection of 304 stainless steel [J].
Arman, S. Y. ;
Omidvar, H. ;
Tabaian, S. H. ;
Sajjadnejad, M. ;
Fouladvand, Sh. ;
Afshar, Sh. .
SURFACE & COATINGS TECHNOLOGY, 2014, 251 :162-169
[2]   Photocatalytic activity of TiO2 doped with boron and vanadium [J].
Bettinelli, M. ;
Dallacasa, V. ;
Falcomer, D. ;
Fornasiero, P. ;
Gombac, V. ;
Montini, T. ;
Romano, L. ;
Speghini, A. .
JOURNAL OF HAZARDOUS MATERIALS, 2007, 146 (03) :529-534
[3]   Tribological performances of the boron carbide coatings sliding against silicon carbide and silicon nitride balls under various relative humidity conditions [J].
Cao, Xueqian ;
Shang, Lunlin ;
Liang, Yongmin ;
Lu, Zhibin ;
Zhang, Guangan ;
Xue, Qunji .
CERAMICS INTERNATIONAL, 2020, 46 (03) :3074-3081
[4]   Biocompatibility of boron nitride nanotubes: An up-date of in vivo toxicological investigation [J].
Ciofani, Gianni ;
Danti, Serena ;
Nitti, Simone ;
Mazzolai, Barbara ;
Mattoli, Virgilio ;
Giorgi, Mario .
INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2013, 444 (1-2) :85-88
[5]   Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution [J].
Cvijovic-Alagic, I. ;
Cvijovic, Z. ;
Mitrovic, S. ;
Panic, V. ;
Rakin, M. .
CORROSION SCIENCE, 2011, 53 (02) :796-808
[6]  
Duta L., 2015, WETTING WETTABILITY, P207, DOI DOI 10.5772/60808
[7]   Sol-gel derived Ag-containing TiO2 films on surface roughened biomedical NiTi alloy [J].
Fu, Tao ;
Shen, Yaogen ;
Alajmi, Zafer ;
Wang, Yuning ;
Yang, Shuiyun ;
Li, Gang .
CERAMICS INTERNATIONAL, 2014, 40 (08) :12423-12429
[8]   In vivo biocompatibility of boron doped and nitrogen included conductive-diamond for use in medical implants [J].
Garrett, David J. ;
Saunders, Alexia L. ;
McGowan, Ceara ;
Specks, Joscha ;
Ganesan, Kumaravelu ;
Meffin, Hamish ;
Williams, Richard A. ;
Nayagam, David A. X. .
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2016, 104 (01) :19-26
[9]   TiO2 nanopowders doped with boron and nitrogen for photocatalytic applications [J].
Gombac, V. ;
De Rogatis, L. ;
Gasparotto, A. ;
Vicario, G. ;
Montini, T. ;
Barreca, D. ;
Balducci, G. ;
Fornasiero, P. ;
Tondello, E. ;
Graziani, M. .
CHEMICAL PHYSICS, 2007, 339 (1-3) :111-123
[10]   Effect of thermal oxidation on corrosion and corrosion-wear behaviour of a Ti-6A1-4V alloy [J].
Güleryüz, H ;
Çimenoglu, H .
BIOMATERIALS, 2004, 25 (16) :3325-3333