Application of the small-punch test on the evaluation of cryogenic toughness of isothermally aged austenitic stainless steels

被引:12
|
作者
Saucedo-Muñoz, ML
Komazaki, SI
Hashida, T
Shoji, T
López-Hirata, VM
机构
[1] Tohoku Univ, Inst Invest Fractura, Sendai, Miyagi 980, Japan
[2] Inst Politecn Nacl, Mexico City 07051, DF, Mexico
[3] Inst Tecnol Mororan, Hokkaido 0508585, Japan
关键词
small-punch test; fracture toughness; austenitic stainless steels;
D O I
10.3989/revmetalm.2003.v39.i5.350
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Two types of austenitic stainless steels JJ1 and JN1 were isothermally aged at temperatures from 873 to 1173 K for 10 to 1000 min in order to study the microstructural evolution and its effect on fracture toughness at cryogenic temperatures. The Charpy V-Notch (CVN) and Small-Punch (SP)Testing methods were conducted at 77 K to evaluate the toughness of both solution treated and aged specimens. The fracture energy at 77 K determined for both methods showed a significant decrease with aging time for both steels. A linear correlation between the fracture energies of both methods was found. The intergranular precipitation of carbides and nitrides was responsible for the fracture toughness deterioration. The scanning electron microscope fractographs showed an intergranular brittle fracture and its fraction also increased with aging time and temperature. The presence of a more abundant intergranular precipitation resulted in a more rapid decrease in fracture toughness with aging time in JN1 steel due to its higher content of C and N, compared to that of JJ1 steel.
引用
收藏
页码:378 / 386
页数:9
相关论文
共 45 条
  • [11] Evaluation of toughness deterioration by an electrochemical method in an isothermally-aged N-containing austenitic stainless steel
    Saucedo-Munoz, Maribel L.
    Lopez-Hirata, Victor M.
    Avila-Davila, Erika O.
    Melo-Maximo, Dulce V.
    MATERIALS CHARACTERIZATION, 2009, 60 (02) : 119 - 124
  • [12] EVALUATION OF TOUGHNESS DETERIRATION BY AN ELECTROCHEMICAL METHOD IN AN ISOTHERMALLY-AGED N-CONTAINING AUSTENITIC STAINLESS STEEL
    Saucedo-Munoz, Maribel L.
    Lopez-Hiratal, Victor M.
    TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2009, : 331 - 338
  • [13] Evaluation of the Effects of Thermal Aging of Austenitic Stainless Steel Welds Using Small Punch Test
    Hong, S. H.
    Seo, M. -G.
    Jang, C. H.
    Lee, K. -S.
    PRESSURE VESSEL TECHNOLOGY: PREPARING FOR THE FUTURE, 2015, 130 : 1010 - 1018
  • [14] Estimation of Mechanical Properties of Stainless Steel AISI 410 by Small-Punch Testing (Erickson Test)
    Hassan, A-P
    METAL SCIENCE AND HEAT TREATMENT, 2014, 56 (3-4) : 165 - 168
  • [15] Effect of precipitation on cryogenic toughness in N-containing austenitic stainless steels
    Saucedo-Munoz, M. L.
    Hashida, T.
    Watanabe, Y.
    Shoji, T.
    Lopez-Hirata, V. M.
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 4914 - +
  • [16] Application of a database in the evaluation of strengths of Cr-Mo steels by means of small punch test
    Zhong, Jiru
    Song, Ming
    Guan, Kaishu
    Dymacek, Petr
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, 166
  • [17] Estimation of Mechanical Properties of Stainless Steel AISI 410 by Small-Punch Testing (Erickson Test)
    A.-P. Hassan
    Metal Science and Heat Treatment, 2014, 56 : 165 - 168
  • [18] Investigation on the microstructure and toughness properties of austenitic and duplex stainless steels weldments under cryogenic conditions
    Yildizli, Kemal
    MATERIALS & DESIGN, 2015, 77 : 83 - 94
  • [19] DETERMINATION OF FRACTURE TOUGHNESS AND TENSILE PROPERTIES OF STRUCTURAL STEELS BY SMALL PUNCH TEST AND MICRO-TENSILE TEST
    Konopik, Pavel
    Dzugan, Jan
    Prochazka, Radek
    METAL 2013: 22ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2013, : 772 - 777
  • [20] A study concerning material fracture toughness and some small punch test data for low alloy steels
    Bulloch, JH
    ENGINEERING FAILURE ANALYSIS, 2004, 11 (04) : 635 - 653