Enhanced chemosensing of ammonia based on the novel molecular semiconductor-doped insulator (MSDI) heterojunctions

A series of new molecular semiconductor-doped insulator (MSDI) heterojunctions as conductimetric transducers to NH3 sensing were fabricated based on a novel semiconducting molecular material, an amphiphilic tris(phthalocyaninato) rare earth triple-decker complex, Eu-2[Pc(15C5)(4)](2)[Pc(OC10H21)8)], quasi-Langmuir-Shafer (QLS) film, as a top-layer, and vacuum-deposited and cast film of CuPc as well as copper tetra-tert-butyl phthalocyanine (CuTTBPc) QLS film as a sub-layer, named as MSDIs 1.2 and 3, respectively. MSDIs 1-3 and respective sub-layers prepared from three different methods were characterized by X-ray diffraction, electronic absorption spectra and current-voltage (I-V) measurements. Depending on the sub-layer film-forming method used, alpha-phase CuPc film structure, beta-phase CuPc crystallites and H-type aggregates of CuTTBPc have been obtained, respectively. An increasing sensitivity to NH3 at varied concentrations in the range of 15-800 ppm, follows the order MSDI 2 < MSDI 3 < MSDI 1, revealing the effect of sub-layer film structures on sensing performance of the MSDIs. In particular, the time-dependent current plot of the MSDI 1, with a-phase CuPc film as a sub-layer, clearly shows an excellent separation of the different ammonia concentration levels and nearly complete reversibility and reproducibility even at room temperature, which is unique among the phthalocyanine-based ammonia sensors thus far reported in the literature. This provides a general method to improve sensor response of organic heterojunctions by controlling and tuning the film structure of sub-layer with appropriate fabrication techniques. On the other hand, the enhanced sensitivity, stability and reproducible response of the MSDI 1 heterostructure in comparison with the respective single-layer films have also been obtained. A judicious combination of materials and molecular architectures has led to enhanced sensing properties of the MSDI 1, in which control at the molecular level can be achieved. (C) 2010 Elsevier B.V. All rights reserved.