Influence of the Sand Addition on the Processing, Properties and Microstructure of Red Ceramic

被引：3

作者：

Fontes Vieira, Carlos Mauricio ^{[1
]}

Teixeira Queiroz, Luiz Fernando ^{[1
]}

Monteiro, Sergio Neves ^{[1
]}

机构：

[1] State Univ N Fluminense Darcy Ribeiro UENF, Adv Mat Lab LAMAV, BR-28013602 Campos Dos Goytacazes, RJ, Brazil

来源：

ADVANCED POWDER TECHNOLOGY VII | 2010年 / 660-661卷

关键词：

Clay; Sand; Red Ceramic; ceramic body; Roofing Tiles;

D O I：

10.4028/www.scientific.net/MSF.660-661.801

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

This work has as its objective to add sand, up to 25 wt.%, to a clayey ceramic body used for roofing tiles fabrication. Specimens were prepared by extrusion and fired at 850 degrees C. The evaluated properties were: plasticity, water absorption and flexural rupture strength. The microstructure of the fired ceramic was evaluated by scanning electron microscopy. The results indicated that the sand improved the evaluated properties of the ceramic as well as its processing. The microstructure of the ceramic presented a minor amount of porosity as a function of the sand addition.

引用

页码：801 / 806

页数：6

共 12 条

[1]

Abajo M., 2000, MANUAL FABRICACION B

[2]

ABNT-Associacao Brasileira de Normas Tecnicas, 2016, 7180 ABNT NBR

[3]

ABNT-Associacao Brasileira de Normas Tecnicas, 2016, 6459 ABNT NBR

[4]

[Anonymous], 1977, C67477 ASTM

[5]

Associacao Brasileira de Normas Tecnicas - ABNT, 2005, 15310 ABNT NBR

[6]

ASTM-American society for testing and materials, 1972, C373-72.

[7]

Brazilian Association of Technical Standards-ABNT, 1984, NBR7181 ABNT

[8] Porcelain - Raw materials, processing, phase evolution, and mechanical behavior [J].

Carty, WM ;

Senapati, U .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1998, 81 (01) :3-20

[9]

Emiliani G.P., 1999, Tecnologia Ceramica-Le Materie Prime

[10]

Marsigli M., 1997, L'Industria dei Laterizi, V46, P214

← 1 2 →