Effects of fuel cracking on combustion characteristics of a supersonic model combustor

被引:17
|
作者
Zhong, Zhan [1 ]
Wang, Zhenguo [1 ]
Sun, Mingbo [1 ]
机构
[1] Natl Univ Def Technol, Sci & Technol Scramjet Lab, Changsha 410073, Hunan, Peoples R China
基金
中国国家自然科学基金;
关键词
Scramjet; Combustion characteristic; Fuel cracking; Vaporized RP-3; Ethylene; AVIATION KEROSENE; IGNITION; INJECTION; PROPULSION; SIMULATION;
D O I
10.1016/j.actaastro.2015.01.003
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
The compositions of endothermic hydrocarbon fuels in cooling channels of regenerative cooled scramjet engines change along with fuel cracking. To investigate the effect of fuel compositions variation resulting from cracking on the combustion characteristics of supersonic combustors, a series of combustion tests with a wide range of equivalence ratios were conducted in a direct-connected test rig under the inflow conditions of Ma=3.46 and T-t=1430 K. The combustion characteristics of room temperature ethylene and vaporized China no. 3 aviation kerosene (RP-3) with negligible cracking weie analyzed and compared based on the measured static pressure distributions along the combustor wall, fuel specific impulses, flame luminosity images and the one-dimensional average flow parameter distributions calculated by a quasi-one-dimensional data analysis method. The experimental results showed that the differences between the combustion characteristics of vaporized RP-3 and ethylene were sensitive to equivalence ratio. Under low equivalence ratios, vaporized RP-3 and ethylene had remarkably different combustion characteristics. Ethylene had an obvious higher static pressure level, specific impulse and combustion efficiency than vaporized RP-3 for its higher activity. The difference of combustion performance between vaporized RP-3 and ethylene was narrowed with the increase of equivalence ratio and the corresponding combustion condition improvement. When the equivalence ratio increased to 1.09, vaporized RP-3 and ethylene had tiny difference in combustion performance. (C) 2015 IAA. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:1 / 8
页数:8
相关论文
共 50 条
  • [31] Numerical simulation of the effects of pulsed injection on combustion and flow processes in a supersonic combustor
    He, Zan
    Tian, Ye
    Le, Jialing
    PHYSICS OF FLUIDS, 2024, 36 (10)
  • [32] Analysis of supersonic combustion characteristics of ethylene/methane fuel mixture on high-speed measurements of CH* chemiluminescence
    Nakaya, Shinji
    Kinoshita, Ryosuke
    Lee, Jeonghoon
    Ishikawa, Hiromu
    Tsue, Mitsuhiro
    PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2019, 37 (03) : 3749 - 3756
  • [33] Combustion characteristics of small-scaled duct combustor in low enthalpy supersonic flow
    Kim, Chae-Hyoung
    Jeung, In-Seuck
    PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2017, 36 (02) : 2873 - 2882
  • [34] Numerical Investigation on the Effect of Inflow Mach Numbers on the Combustion Characteristics of a Typical Cavity-Based Supersonic Combustor
    Bordoloi, Namrata
    Pandey, Krishna Murari
    Sharma, Kaushal Kumar
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2021, 2021
  • [35] Experimental investigation on combustion performance of cavity-strut injection of supercritical kerosene in supersonic model combustor
    Sun Ming-bo
    Zhong Zhan
    Liang Jian-han
    Wang Hong-bo
    ACTA ASTRONAUTICA, 2016, 127 : 112 - 119
  • [36] Effects of injection pressure variation on mixing in a cold supersonic combustor with kerosene fuel
    Liu, Wei-Lai
    Zhu, Lin
    Qi, Yin-Yin
    Ge, Jia-Ru
    Luo, Feng
    Zou, Hao-Ran
    Wei, Min
    Jen, Tien-Chien
    ACTA ASTRONAUTICA, 2017, 139 : 67 - 76
  • [37] Numerical investigations of supersonic combustion characteristics of thermally cracked fuels at typical pyrolysis temperatures
    Zhang, Dingrui
    Shan, Fanli
    Hou, Lingyun
    AEROSPACE SCIENCE AND TECHNOLOGY, 2024, 144
  • [38] Powder fuel transport process and mixing characteristics in cavity-based supersonic combustor with different injection schemes
    Luo, Shibin
    Feng, Yanbin
    Song, Jiawen
    Xu, Dequan
    Xia, Kunxiong
    AEROSPACE SCIENCE AND TECHNOLOGY, 2022, 128
  • [39] Characteristics of gaseous film cooling with hydrocarbon fuel in supersonic combustion chamber
    Jing, Tingting
    Xu, Zhen
    Xu, Jiachen
    Qin, Fei
    He, Guoqiang
    Liu, Bing
    ACTA ASTRONAUTICA, 2022, 190 : 74 - 82
  • [40] Flame propagation and flashback characteristics in a kerosene fueled supersonic combustor equipped with strut/wall combined fuel injectors
    Zhang, Junlong
    Chang, Juntao
    Wang, Zi'ao
    Gao, Lin
    Bao, Wen
    AEROSPACE SCIENCE AND TECHNOLOGY, 2019, 93