Intuitive Analysis of the Microtribological Behavior of Copper-Coated Graphite-Graphite/Cu Composites with High Graphite Contents

被引:10
|
作者
Zhu, Linying [1 ]
Yi, Maozhong [1 ]
Ge, Yicheng [1 ]
Zhang, Bei [1 ]
Xie, Aolin [1 ]
机构
[1] Cent South Univ, State Key Lab Powder Met, Changsha 410083, Peoples R China
来源
ACS OMEGA | 2022年 / 7卷 / 32期
关键词
TRIBOLOGICAL PROPERTIES; THERMAL-CONDUCTIVITY; MICROSTRUCTURE; WEAR; FRICTION; TEMPERATURE;
D O I
10.1021/acsomega.2c01276
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
To improve the combination of graphite and copper, the friction and wear of a graphite/copper composite with a high content of graphite (50 wt %), copper-coated graphite were used to modify it. To observe the distribution law of each phase in the material and the change of composite surface structure after the friction and wear experiment, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the micro-structure, friction film, debris, and friction cross section of the composites. The results show that the large particle size of copper-coated graphite is anisotropic in the material, which helps to form a friction film with a high graphite content on the contact surface. TEM images of the friction film and debris directly reflect the structure changes of graphite and copper during friction; under normal load and shear force, interlamellar detachment and interlamellar fracture of graphite occur, and its edge is folded and crimped, resulting in the loss of an ordered state in some regions, which results in the instability of crystal lattice and the transition from an ordered to disordered state of graphite, resulting in the (002) halo ring in FFT results. Severe plastic deformation and oxidation reactions occur in copper, and copper oxides are formed, forming a high-strength and smooth oxide film in the metal-rich area and improving the wear resistance of the material. TEM images of the friction section directly show that an inverted triangular deformation zone is formed on the surface of the sample after friction and wear experiments. The edge of the deformation zone is stepped, consisting of a drag zone and an accumulation zone, and the surface of the contact zone is covered by a carbon film.
引用
收藏
页码:28217 / 28225
页数:9
相关论文
共 50 条
  • [1] Copper-coated graphite composites for sliding electrical contacts
    Bara, Adela
    Lungu, Paula
    Bondar, Ana Maria
    REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, 2008, 38 (02): : 130 - 133
  • [2] PRODUCTION OF ALUMINIUM-GRAPHITE PARTICLE COMPOSITES USING COPPER-COATED GRAPHITE PARTICLES
    SURAPPA, MK
    ROHATGI, PK
    METALS TECHNOLOGY, 1978, 5 (OCT): : 358 - 361
  • [3] PRODUCTION OF ALUMINIUM-GRAPHITE PARTICLE COMPOSITES USING COPPER-COATED GRAPHITE PARTICLES.
    Surappa, M.K.
    Rohatgi, P.K.
    1978, 5 (pt 10): : 358 - 361
  • [4] The tribological behaviors of copper-coated graphite filled PTFE composites
    Li, F
    Yan, FY
    Yu, LG
    Liu, WM
    WEAR, 2000, 237 (01) : 33 - 38
  • [5] Effect of copper-coated graphite on tribological properties of phenolic resin composites
    Zhang, En
    Fu, Rong
    Shen, Chang-Bin
    Gao, Fei
    Gao, Fei (gaofei@djtu.edu.cn), 1600, Chongqing Wujiu Periodicals Press (49): : 170 - 176
  • [6] Friction and wear of copper-graphite composites made with Cu-coated and uncoated graphite powders
    Moustafa, SF
    El-Badry, SA
    Sanad, AM
    Kieback, B
    WEAR, 2002, 253 (7-8) : 699 - 710
  • [7] Study on copper matrix composite containing copper-coated graphite particles
    Yin, Yan-Guo
    Du, Chun-Kuan
    Jiao, Ming-Hua
    Yu, Jian-Wei
    Xie, Ting
    Liu, Kun
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2007, 28 (06): : 40 - 44
  • [8] Microstructure and Properties of Copper-Coated Titanium Nitride Particle-Reinforced Copper Matrix Graphite Composites
    Yu-nan Tian
    Li Wei
    Xiu-mei Wang
    Zhuo Li
    Zhi-he Dou
    Ting-an Zhang
    Russian Journal of Non-Ferrous Metals, 2024, 65 (2) : 103 - 112
  • [9] PROPERTIES OF ALUMINUM-GRAPHITE PARTICLE COMPOSITES MADE USING COPPER COATED GRAPHITE
    SURAPPA, MK
    ROHATGI, PK
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1978, 31 (5-6): : 488 - &
  • [10] Interfacial Properties of Copper-coated Graphite Electrodes: Coating Thickness Dependence
    Nobili, F.
    Dsoke, S.
    Mancini, M.
    Marassi, R.
    FUEL CELLS, 2009, 9 (03) : 264 - 268