Experimental investigation on the mechanical properties and strain rate sensitivity of Mg-Al-Ca-Mn alloy under various strain rates

被引：15
作者：
Wang, Zijian [1 ]
Ding, Hanlin [1 ]
Xiao, Zhendong [1 ]
Yang, Chenxi [1 ]
Xiang, Chongchen [1 ]
机构：
[1] Soochow Univ, Shagang Sch Iron & Steel, Suzhou 215000, Jiangsu, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2021年 / 826卷
基金：
中国国家自然科学基金;
关键词：
Mg-Al-Ca-Mn alloy; AZ31; Strain rate; Twin; Dislocation; Texture; MAGNESIUM ALLOY; HIGH-STRENGTH; DEFORMATION; MICROSTRUCTURE; BEHAVIOR; TEXTURE;
D O I：
10.1016/j.msea.2021.141997
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
An Mg-0.8Al-0.1Ca-0.4Mn (AXM080104, wt%) alloy was developed with extraordinary extrudability. The mechanical properties and strain rate sensitivity of the alloy were evaluated under various strain rates. The as extruded alloy exhibited a tensile 0.2% proof stress of 222 MPa and an ultimate tensile strength of 380 MPa at the strain rate of 500/s. The performance of the extruded AXM080104 is superior to that of the AZ31 alloy at the high strain rate. The deformation mechanism of the extruded AXM080104 was examined and analyzed. The high strength is attributed to the simultaneous activation of multiple slip systems, and then a large number of dislocations are packed and entangled at the grain boundaries to cause work hardening.
引用
收藏
页数：8
相关论文
共 28 条
  • [1] Ashby M.F., 1982, DEFORMATION MECH MAP
  • [2] Non-Schmid behaviour during secondary twinning in a polycrystalline magnesium alloy
    Barnett, M. R.
    Keshavarz, Z.
    Beer, A. G.
    Ma, X.
    [J]. ACTA MATERIALIA, 2008, 56 (01) : 5 - 15
  • [3] Determining the strength of GP zones in Mg alloy AXM10304, both parallel and perpendicular to the zone
    Bhattacharyya, J. J.
    Sasaki, T. T.
    Nakata, T.
    Hono, K.
    Kamado, S.
    Agnew, S. R.
    [J]. ACTA MATERIALIA, 2019, 171 : 231 - 239
  • [4] Monotonic and cyclic anisotropies of an extruded Mg-Al-Ca-Mn alloy plate: Experiments and crystal plasticity studies
    Briffod, Fabien
    Shiraiwa, Takayuki
    Enoki, Manabu
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 772
  • [5] Dislocation absorption and transmutation at {10(1)over-bar2} twin boundaries in deformation of magnesium
    Chen, Peng
    Wang, Fangxi
    Li, Bin
    [J]. ACTA MATERIALIA, 2019, 164 : 440 - 453
  • [6] Characterization, modelling and simulation of deformation and fracture behaviour of the light-weight wrought alloys under high strain rate loading
    El-Magd, E
    Abouridouane, M
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2006, 32 (05) : 741 - 758
  • [7] Dynamic recrystallization in AZ31 magnesium alloy
    Fatemi-Varzaneh, S. M.
    Zarei-Hanzaki, A.
    Beladi, H.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 456 (1-2): : 52 - 57
  • [8] A study on the effect of thermo-mechanical parameters on the deformation behavior of Mg-3Al-1Zn
    Fatemi-Varzaneh, S. M.
    Zarei-Hanzaki, A.
    Haghshenas, M.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 497 (1-2): : 438 - 444
  • [9] Effect of Ca additions on microstructure and microhardness of an as-cast Mg-5.0 wt.% Al alloy
    Han, Lihong
    Hu, Henry
    Northwood, Derek O.
    [J]. MATERIALS LETTERS, 2008, 62 (03) : 381 - 384
  • [10] Potential of multi-pass ECAP on improving the mechanical properties of a high-calcium-content Mg-Al-Ca-Mn alloy
    Huang, He
    Liu, Huan
    Wang, Ce
    Sun, Jiapeng
    Bai, Jing
    Xue, Feng
    Jiang, Jinghua
    Ma, Aibin
    [J]. JOURNAL OF MAGNESIUM AND ALLOYS, 2019, 7 (04) : 617 - 627
123