The improvement of strength and ductility in ultra-fine grained 5052 Al alloy by cryogenic- and warm-rolling

被引：35

作者：

Kang, U. G. ^{[1
]}

Lee, J. C. ^{[1
]}

Jeong, S. W. ^{[1
]}

Nam, W. J. ^{[1
]}

机构：

[1] Kookmin Univ, Sch Adv Mat Engn, Seoul 136702, South Korea

来源：

JOURNAL OF MATERIALS SCIENCE | 2010年 / 45卷 / 17期

关键词：

MECHANICAL-PROPERTIES; MICROSTRUCTURES; SIZE;

D O I：

10.1007/s10853-010-4573-6

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effects of deformation temperatures and post-deformation annealing on mechanical properties, in conjunction with microstructural evolution in the 5052 Al alloy, were investigated. The combination of cryogenic-rolling with warm-rolling effectively increased tensile strength and yield strength without the decrease of ductility through the formation of ultra-fine grains with dynamic recovery in the 5052 Al alloy. And static annealing, as a post-heat treatment, enhanced the ductility. Therefore, ultra-fine grained 5052 Al alloy with high strength and a moderate level of ductility could be made by the combination of cryogenic-rolling with warm-rolling and the additional static annealing process.

引用

页码：4739 / 4744

页数：6

共 49 条

[21] Significant strengthening effect in ultra-fine grained Al alloy made by fast solidification and hot extrusion processes
Jin, Shuoxun
Wang, Anding
Wang, Kang
Li, Wenfang
Wan, Bingbing
Zhai, Tongguang
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 16 : 1761 - 1769
[22] Experimental and Modelling Study of Ultra-Fine Grained ZK60 Magnesium Alloy with Simultaneously Improved Strength and Ductility Processed by Parallel Tubular Channel Angular Pressing
M. Mesbah
A. Fattahi
A. R. Bushroa
G. Faraji
K. Y. Wong
W. J. Basirun
A. Fallahpour
B. Nasiri-Tabrizi
Metals and Materials International, 2021, 27 : 277 - 297
[23] Experimental and Modelling Study of Ultra-Fine Grained ZK60 Magnesium Alloy with Simultaneously Improved Strength and Ductility Processed by Parallel Tubular Channel Angular Pressing
Mesbah, M.
Fattahi, A.
Bushroa, A. R.
Faraji, G.
Wong, K. Y.
Basirun, W. J.
Fallahpour, A.
Nasiri-Tabrizi, B.
METALS AND MATERIALS INTERNATIONAL, 2021, 27 (02) : 277 - 297
[24] Stress-Induced Grain Growth in an Ultra-Fine Grained Al Alloy (vol 45, pg 795, 2014)
Lin, Yaojun
Wen, Haiming
Li, Ying
Wen, Bin
Liu, Wei
Lavernia, Enrique J.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2014, 45 (05): : 1948 - 1964
[25] Improvement of strength, toughness and ductility in ultrafine-grained low-carbon steel processed by warm bi-axial rolling
Inoue, Tadanobu
Ueji, Rintaro
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 786
[26] Slow strain rate testing and stress corrosion cracking of ultra-fine grained and conventional Al-Mg alloy
Sharma, Mala M.
Tomedi, Josh D.
Weigley, Timothy J.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 619 : 35 - 46
[27] Precipitation phenomena, thermal stability and grain growth kinetics in an ultra-fine grained Al 2014 alloy after annealing treatment
Dhal, A.
Panigrahi, S. K.
Shunmugam, M. S.
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 649 : 229 - 238
[28] Aging Behavior of Ultra-Fine Grained Al-0.5%Si-0.5%Ge Alloy Fabricated by ARB Process
Nakagawa, Keiyu
Tsuji, Nobuhiro
Terada, Daisuke
Nakano, Toshihiko
Nizam, Khairul
Kanadani, Teruto
MATERIALS TRANSACTIONS, 2014, 55 (02) : 249 - 254
[29] A good combination of strength and ductility of ultra-coarse-grained Cu-Al alloy with coarse-grained surface layer via pre-torsional treatment
Gong, Yanli
Gu, Ji
Ni, Song
Wu, Hong
Song, Min
MICRON, 2020, 129
[30] Accumulative fold-forging (AFF) as a novel severe plastic deformation process to fabricate a high strength ultra-fine grained layered aluminum alloy structure
Khodabakhshi, F.
Gerlich, A. P.
MATERIALS CHARACTERIZATION, 2018, 136 : 229 - 239

← 1 2 3 4 5 →