AN EVALUATION OF THE STABILITY OF MOULD FLUX PROPERTIES IN THE PROCESS OF CONTINUOUS STEEL CASTING

被引：1

作者：

Falkus, J. ^{[1
]}

机构：

[1] AGH Univ Sci & Technol Krakow, Fac Met Engn & Ind Comp Sci, Al Mickiewicza 30, PL-30059 Krakow, Poland

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2017年 / 62卷 / 02期

关键词：

mould flux; alumina inclusions; liquidus temperature; flux consumption; INCLUSIONS;

D O I：

10.1515/amm-2017-0130

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This paper presents research on the mould slag formed on the basis of two mould fluxes. In the conducted industrial experiments, slag was sampled in equal time intervals between adding subsequent portions of mould flux. The research focused on the an evaluation of the stability of slag parameters by assessing the change in its liquidus temperature. It was shown that a mould flux needs to be assessed individually taking into account the casting process parameters and the steel cast grade.

引用

页码：885 / 889

页数：5

共 7 条

[1] Numerical simulation of steel flow and behaviour of non-metallic inclusions in the six-strand tundish with stopper rod system
Cwudzinski, Adam
Jowsa, Jan
[J]. THERMEC 2009, PTS 1-4, 2010, 638-642 : 3176 - 3181
[2] INFLUENCE OF INCLUSIONS MODIFICATION ON NOZZLE CLOGGING
Lamut, J.
Falkus, J.
Jurjevec, B.
Knap, M.
[J]. ARCHIVES OF METALLURGY AND MATERIALS, 2012, 57 (01) : 319 - 324
[3] Schulz T, 2008, STAHL EISEN, V128, P65
[4] Structurally Based Assessment of the Influence of Fluorides on the Characteristics of Continuous Casting Powder Slags
Schulz, Tilo
Lychatz, Bernd
Haustein, Nicole
Janke, Dieter
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2013, 44 (02): : 317 - 327
[5] Seetharaman S., 2014, IND PROCESSES A
[6] Tadleckova M., 2015, 24 INT C MET MAT TAN, P54
[7] Tanaka T., 2004, P MET SEP TECHN HELD, P135

← 1 →