Stability domain of Ti(CN) in Ti-TiC-TiN

被引：6

作者：

Kwon, Hanjung ^{[1
]}

Kang, Shinhoo ^{[2
]}

机构：

[1] Korea Inst Geosci & Mineral Resources, Mineral Resources Res Div, Taejon 305350, South Korea

[2] Seoul Natl Univ, Dept Mat Sci & Engn, Seoul 151742, South Korea

来源：

MATERIALS LETTERS | 2012年 / 68卷

关键词：

Ceramics; Phase diagrams; Titanium carbonitride; Stability domain; Thermodynamics; DECREASING GRAIN-SIZE; SOLID-SOLUTIONS; TITANIUM CARBONITRIDE; SOLUBILITY; INCREASE; ZNO;

D O I：

10.1016/j.matlet.2011.11.030

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Phase stability diagrams of Ti-TiC-TiN-Ti(CN) system were constructed at 1673 K as a function of carbon activity, nitrogen pressure, and characteristics of solution formation. The domains for Ti and Ti(CN) exist in real systems. It was also found that the domain for Ti(CN) is much larger than that of ideal mixing of TiC and TiN. This is because the mixing reaction of TiC and TiN or the nitriding of TiC occurs exothermically. The stable area of nano-sized Ti(CN) was smaller than that of micron-sized Ti(CN) due to the instability of nano-sized Ti(CN). (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：426 / 428

页数：3

共 50 条

[41] TIN, TIC AND TI(C,N) FILM CHARACTERIZATION AND ITS RELATIONSHIP TO TRIBOLOGICAL BEHAVIOR
BERTONCELLO, R
CASAGRANDE, A
CASARIN, M
GLISENTI, A
LANZONI, E
MIRENGHI, L
TONDELLO, E
SURFACE AND INTERFACE ANALYSIS, 1992, 18 (07) : 525 - 531
[42] Synthesis of ultrafine TiC1-X and Ti(CN) powders via planetary milling
Jung, J
Kang, S
POWDER METALLURGY, 2004, 47 (01) : 93 - 98
[43] Ti（CN）/TiC/Al2O3/TiN多层涂层的结构和界面结合力研究
张进
程小伟
薛屺
真空, 2011, 48 (06) : 25 - 28
[44] 化学气相沉积TiC-Ti(CN)-TiN涂层在硬质合金模具上应用研究
张福林
张林荣
表面技术, 1995, (01) : 27 - 30+49
[45] Granulation of primary dendritic TiC in TiC/Ti composite
Jin, YX
Zeng, SY
Zhang, CJ
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2003, 13 : 89 - 93
[46] Comparison of the Ti/TiN/AlCu/TiN stack with TiN/AlCu/Ti/TiN stack for application in ULSI metallization
Menon, SS
Choudhury, RK
MICROELECTRONIC DEVICE AND MULTILEVEL INTERCONNECTION TECHNOLOGY II, 1996, 2875 : 322 - 333
[47] Synthesis of TiC and Ti/TiC composites by reaction milling followed by hot consolidation of Ti with graphite or heptane
Yasukawa, A
Nagumo, M
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1999, 63 (07) : 822 - 827
[48] Synthesis of TiC and Ti/TiC composites by reaction milling followed by hot consolidation of Ti with graphite or heptane
Yasukawa, Akiko
Nagumo, Michihiko
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 1999, 63 (07): : 822 - 827
[49] Dry sliding wear behavior of TiB/Ti and TiC/Ti composites
Izui, Hiroshi
Toen, Kazuhiro
Kamegawa, Shoji
Komiya, Yoshiki
MECHANICAL ENGINEERING JOURNAL, 2018, 5 (04):
[50] Effects of Ti insertion between Cu and TiN layers on reliability in Cu/Ti/TiN/Ti layered damascene interconnects
Abe, K
Onoda, H
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2003, 21 (03): : 1161 - 1168

← 1 2 3 4 5 →