New route to densify tantalum carbide at 1400 °C by spark plasma sintering

被引：37

作者：

Liu, Limeng ^{[1
]}

Ye, Feng ^{[1
]}

Zhou, Yu ^{[1
]}

机构：

[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2011年 / 528卷 / 13-14期

基金：

中国博士后科学基金;

关键词：

Tantalum carbide; Spark plasma sintering; Densification; MECHANICAL-PROPERTIES; CERAMICS; DENSIFICATION; COMPOSITES; BEHAVIOR; TAC; MICROSTRUCTURE; ADDITIVES; SYSTEM;

D O I：

10.1016/j.msea.2011.02.074

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Tantalum carbide with a TaC(0.9) composition was sintered to 96% relative density by spark plasma sintering at 1400 degrees C for 5 min, using commercial micrometric Ta and TaC powders as the starting materials. This achievement was dependent on the delicate rearrangement of the heating process which limits evaporation-condensation and promotes the mass transportation in association with 0.9TaC + Ta = TaC(0.9) reaction. The dense TaC(0.9) ceramic had a uniform microstructure composed of equiaxed grains, and showed flexure strength up to similar to 498 MPa. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：4710 / 4714

页数：5

共 26 条

[1] Low-Temperature Formation of Ultra-High-Temperature Transition Metal Carbides from Salt-Polymer Precursors [J].

Adamczak, Andrea D. ;

Spriggs, Adam A. ;

Fitch, Danielle M. ;

Radovic, Miladin ;

Grunlan, Jaime C. .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2010, 93 (08) :2222-2228

[2] Spark plasma sintered tantalum carbide: Effect of pressure and nano-boron carbide addition on microstructure and mechanical properties [J].

Bakshi, Srinivasa R. ;

Musaramthota, Vishal ;

Lahiri, Debrupa ;

Singh, Virendra ;

Seal, Sudipta ;

Agarwal, Arvind .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (03) :1287-1295

[3]

Boch P., 2001, Ceramic materials: processes, properties and applications, V2nd

[4] VARIATION OF LATTICE PARAMETER WITH CARBON CONTENT OF TANTALUM CARBIDE [J].

BOWMAN, AL .

JOURNAL OF PHYSICAL CHEMISTRY, 1961, 65 (09) :1596-&

[5] Atomic and vacancy ordering in carbide ζ-Ta4C3-x (0.28≤x≤0.40) and phase equilibria in the Ta-C system [J].

Gusev, A. I. ;

Kurlov, A. S. ;

Lipatnikov, V. N. .

JOURNAL OF SOLID STATE CHEMISTRY, 2007, 180 (11) :3234-3246

[6] Phase Constitution and Mechanical Properties of Carbides in the Ta-C System [J].

Hackett, Kenneth ;

Verhoef, Shane ;

Cutler, Raymond A. ;

Shetty, Dinesh K. .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2009, 92 (10) :2404-2407

[7] A discussion on the absence of plasma in spark plasma sintering [J].

Hulbert, Dustin M. ;

Anders, Andre ;

Andersson, Joakim ;

Lavernia, Enrique J. ;

Mukherjee, Amiya K. .

SCRIPTA MATERIALIA, 2009, 60 (10) :835-838

[8] Spark plasma sintering of tantalum carbide [J].

Khaleghi, Evan ;

Lin, Yen-Shan ;

Meyers, Marc A. ;

Olevsky, Eugene A. .

SCRIPTA MATERIALIA, 2010, 63 (06) :577-580

[9] Mechanical properties and rapid consolidation of binderless nanostructured tantalum carbide [J].

Kim, Byung-Ryang ;

Woo, Kee-Do ;

Doh, Jung-Mann ;

Yoon, Jin-Kook ;

Shon, In-Jin .

CERAMICS INTERNATIONAL, 2009, 35 (08) :3395-3400

[10] Pressureless Sintering of Tantalum Carbide Ceramics without Additives [J].

Liu, Ji-Xuan ;

Kan, Yan-Mei ;

Zhang, Guo-Jun .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2010, 93 (02) :370-373

← 1 2 3 →