Growth of Ag nanoparticles using plasma-modified multi-walled carbon nanotubes

被引:10
|
作者
Tseng, Chun-Hao [1 ]
Chen, Chuh-Yung [1 ]
机构
[1] Natl Cheng Kung Univ, Dept Chem Engn, Tainan 70101, Taiwan
关键词
D O I
10.1088/0957-4484/19/03/035606
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
This study presents a novel method for preparing multi-walled carbon nanotubes (MWNTs) grafted with a poly(2-hydroxyethyl methacrylate) (HEMA)-silver complex (CNTs-HEMA-Ag complex) through plasma-induced grafting polymerization. The characteristics of the MWNTs after being grafted with HEMA polymer are monitored by Fourier transform infrared (FT-IR) spectroscopy. The chelating groups in the HEMA polymer grafted on the surface of the CNTs-HEMA are the coordination sites for chelating silver ions, and are further used as nanotemplates for the growing of Ag nanoparticles (quantum dots). Transmission electron microscopy (TEM) reveals that the particle size of Ag nanoparticles on the CNT surfaces increases with the Ag+ chelating concentration, reaction time, and reaction temperature. Moreover, the crystalline phase of Ag nanoparticles is identified by using x-ray diffraction (XRD). In addition, high-resolution x-ray photoelectron spectroscopy (XPS) is used to characterize the functional groups on the surface of the MWNTs after chemical modification through plasma treatment; it demonstrates that the growing amount of the Ag nanoparticles on the nanotubes increases with the Ag+ chelating concentration due to the blocking effect of the Ag particles forming on the MWNTs.
引用
收藏
页数:8
相关论文
共 50 条
  • [1] Characteristics of polyimide-based nanocomposites containing plasma-modified multi-walled carbon nanotubes
    Chou, Wan-Jung
    Wang, Cheng-Chien
    Chen, Chuh-Yung
    COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (10-11) : 2208 - 2213
  • [2] Effect of carbon nanotubes on mechanical, electrical and thermal properties of plasma-modified multi-walled carbon nanotubes/polyimide nanocomposites
    Gayathry, S.
    Thomas, Aleena Anna
    Lavanya, J.
    Gomathi, N.
    Joseph, K.
    Neogi, S.
    Nair, C. P. Reghunadan
    2ND INTERNATIONAL CONFERENCE ON EMERGING TECHNOLOGIES: MICRO TO NANO 2015 (ETMN-2015), 2016, 1724
  • [3] The enhanced growth of multi-walled carbon nanotubes using an atmospheric pressure plasma jet
    Lee, Kyung Hwan
    Jang, Hoon-Sik
    Eom, Gum-Yong
    Lee, Byeong-Jun
    Burk, Dorothea
    Overzet, Lawrence
    Lee, Gil S.
    MATERIALS LETTERS, 2008, 62 (23) : 3849 - 3851
  • [4] Growth of Multi-walled Carbon Nanotubes on Platinum
    Yunusa, Zainab
    Hamidon, Mohd Nizar
    Rashid, Suraya Abdul
    2013 IEEE REGIONAL SYMPOSIUM ON MICRO AND NANOELECTRONICS (RSM 2013), 2013, : 363 - 366
  • [5] On the temporary growth of multi-walled carbon nanotubes
    Bartsch, K
    Leonhardt, A
    ELECTRONIC PROPERTIES OF SYNTHETIC NANOSTRUCTURES, 2004, 723 : 36 - 39
  • [6] Application of multi-walled carbon nanotubes modified with boron oxide nanoparticles in electrochemistry
    Nikos. G. Tsierkezos
    Uwe Ritter
    Yudi. Nugraha Thaha
    Clive Downing
    Ionics, 2015, 21 : 3087 - 3095
  • [7] Application of multi-walled carbon nanotubes modified with boron oxide nanoparticles in electrochemistry
    Tsierkezos, Nikos G.
    Ritter, Uwe
    Thaha, Yudi. Nugraha
    Downing, Clive
    IONICS, 2015, 21 (11) : 3087 - 3095
  • [8] Multi-Walled Carbon Nanotube Growth in Multi-Walled Carbon Nanotubes by Chemical Vapor Deposition
    Hasegawa, Takayuki
    Arenas, Daniel J.
    Kohno, Hideo
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2015, 15 (02) : 1801 - 1804
  • [9] Etching of multi-walled carbon nanotubes using energetic plasma ions
    Cho, Jung-Hyun
    Kim, Gon-Ho
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2006, 45 (10B): : 8317 - 8322
  • [10] Magnetoresistance of multi-walled carbon nanotubes modified with iron
    Ovsienko, I. V.
    Matzui, L. Y.
    Yatsenko, I. V.
    Khrapatiy, S. V.
    Prylutskyy, Y. I.
    Ritter, U.
    Scharff, P.
    Le Normand, F.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2013, 44 (2-3) : 161 - 166