In Situ Formation of Microfibrillar PBAT in PGA Films: An Effective Way to Robust Barrier and Mechanical Properties for Fully Biodegradable Packaging Films

Poly(glycolic acid) (PGA) is a semicrystalline biodegradable polyester with high gas barrier properties. However, due to its poor processability and low ductility, PGA could hardly find applications in the packaging field. Here, a strategy was adopted for in situ generation of high-aspect-ratio flexible microfibrils with strong interface affinity for the PGA matrix. Because poly(butylene adipate-co-terephthalate) (PBAT) possesses impressive ductility, it was selected as the "fibrillar toughening phase" to enhance the ductility of PGA. Moreover, a chain extender was used to enhance the interfacial adhesion between the two polymers. The extrusion blown film technique was then used to develop fully biodegradable PGA/PBAT films with a superior combination of excellent barrier performance and robust mechanical properties. The PBAT phase can in situ form microfibrils under the influence of extensional flow. Simultaneously, the synergetic function of the extensional flow field could effectively promote the motion of the PGA molecular chain to develop an oriented crystalline microstructure. Because of the aligned oriented lamellar crystal of PGA and oriented PBAT fibril structures serving as robust "barrier walls" 60PGA/ADR blown films demonstrated dramatically improved resistance to oxygen and water vapor, with 59 and 44 times lower oxygen permeability and water vapor permeability; respectively, when compared to the neat PBAT blown film. As a result, PGA/PBAT blown films offer a variety of benefits, including superior ductility, toughness, and a strong gas barrier property. The potential of these films to degrade makes them a viable contender for replacing classical nondegradable packing films.