Experimental investigation the effects of mixture impoverished on the specific fuel consumption, engine performance and exhaust emissions a pre-combustion chamber gasoline engine

被引:5
作者
Bagirov, Hanlar [1 ]
Can, Ibrahim [1 ]
Oner, Cengiz [2 ]
Sugozu, Ilker [3 ]
Kapicioglu, Abdullah [1 ]
机构
[1] Univ Cumhuriyet, Fac Technol, Dept Automot Engn, TR-58140 Sivas, Turkey
[2] Firat Univ, Dept Automot Engn, TR-23119 Elazig, Turkey
[3] Mersin Univ, Dept Automot Engn, TR-33343 Mersin, Turkey
关键词
Pre-combustion chamber; Gasoline; Fuel spray; Direct injection;
D O I
10.1016/j.joei.2014.09.009
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
In this study were investigation of the effect on exhaust gas emissions and the power cycle parameters change of changing the number of injector holes in pre-chamber a gasoline engine. In study 1, 2 and 3-hole injector used and the results were compared with conventional injection spray and flame ignition (ISFI) system engine. The formation of the different rates mixture in the cylinder, exhaust emissions and operate different effects on the parameters of the power cycle. This has been revealed by examining the change of the values experimentally. It has been try to constant of blowing severity fresh air into the pre combustion chamber, mix contents and other factors affecting combustion chamber. In addition, all changes made were to investigate the effects on the performance of the engine. In experiments standard injection engine with developed the pre-chamber engine were used and compared with each other. Positive results were obtained in emissions and engine performance values. (C) 2014 Energy Institute. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:205 / 208
页数:4
相关论文
共 5 条
[1]  
Can I., 2009, THESIS FIRAT U FEN B
[2]  
Celikten I., 1993, GAZI U TEK EGITIM FA, V4, P115
[3]  
Kutlar O.A., 2000, MUHENDIS MAKINE, V483, P46
[4]   An experimental study of the combustion characteristics in SCCI and CAI based on direct-injection gasoline engine [J].
Lee, C. H. ;
Lee, K. H. .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2007, 31 (08) :1121-1132
[5]  
Thring R.H., 1983, J AUTOMOT ENG, V91, P30