Numerical modelling of timber and timber joints: computational aspects

被引：29

作者：

Sandhaas, Carmen ^{[1
]}

Sarnaghi, Ani Khaloian ^{[2
]}

van de Kuilen, Jan-Willem ^{[2
,3
]}

机构：

[1] Karlsruhe Inst Technol, Timber Struct & Bldg Construct, R Baumeister Pl 1, D-76131 Karlsruhe, Germany

[2] Tech Univ Munich, Holzforsch Munchen, Winzererstr 45, D-80797 Munich, Germany

[3] Delft Univ Technol, Biobased Struct & Mat, Delft, Netherlands

来源：

WOOD SCIENCE AND TECHNOLOGY | 2020年 / 54卷 / 01期

关键词：

CONSTITUTIVE MODEL; TO-GRAIN; DAMAGE; FAILURE; LOAD; TESTS; WOOD; BEHAVIOR;

D O I：

10.1007/s00226-019-01142-8

中图分类号：

S7 [林业];

学科分类号：

0829 ; 0907 ;

摘要：

Timber joints with their simultaneous ductile and brittle failure modes still pose a major challenge when it comes to modelling. Wood is heterogeneous and highly anisotropic. It shows ductile behaviour in compression and brittle behaviour in tension and shear. A 3D constitutive model for wood based on continuum damage mechanics was developed and implemented via a subroutine into a standard FE framework. Embedment and joint tests using three different wood species (spruce, beech and azobe) were carried out, and the results were compared with modelling outcomes. The failure modes could be identified, and the general shape of the load-displacement curves agreed with the experimental outcomes.

引用

页码：31 / 61

页数：31

共 50 条

[31] Experimental study on fire resistance of traditional timber mortise-tenon joints with damages
Song, Xiao-bin
Zhang, Yu
Lu, Yu
Peng, Yi-qing
Zhou, Haizhu
FIRE SAFETY JOURNAL, 2023, 138
[32] Numerical modelling of timber connections under fire loading using a component model
Cachim, Paulo B.
Franssen, Jean-Marc
FIRE SAFETY JOURNAL, 2009, 44 (06) : 840 - 853
[33] A simple strategy for constitutive modelling of timber
Valipour, Hamid
Khorsandnia, Nima
Crews, Keith
Foster, S.
CONSTRUCTION AND BUILDING MATERIALS, 2014, 53 : 138 - 148
[34] Service life modelling of timber structures
de Kuilen, L-W. G. van
MATERIALS AND STRUCTURES, 2007, 40 (01) : 151 - 161
[35] Service life modelling of timber structures
J.-W. G. van de Kuilen
Materials and Structures, 2007, 40 : 151 - 161
[36] Mechanical properties of hybrid joints in timber structures
Imakawa, Kosuke
Ochiai, Yo
Aoki, Kenji
Hori, Naruhito
Takemura, Akio
Yamaguchi, Tetsuo
JOURNAL OF WOOD SCIENCE, 2022, 68 (01)
[37] Bolted joints for small and medium reticulated timber domes: experimental study, numerical simulation, and design strength estimation
Shu, Zhan
Li, Zheng
He, Minjuan
Chen, Fei
Hu, Chao
Liang, Feng
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2020, 20 (03)
[38] Analysis of Behavior and Carrying Capacity of Glued Timber-Timber Joints Loaded with Bending Moment
Lokaj, Antonin
Vavrusova, Kristyna
Mikolasek, David
STRUCTURAL AND PHYSICAL ASPECTS OF CONSTRUCTION ENGINEERING, 2017, 190 : 263 - 270
[39] Realistic Modelling and Simulation of Timber Structures
Konopka, D.
Fleischhauer, R.
Schietzold, F. N.
Rahmi, D.
Stoecklein, J.
May, M.
Kaliske, M.
BAUINGENIEUR, 2024, 99 (7-8): : 231 - 243
[40] Dragonfly wing venous cross-joints inspire the design of higher-performance bolted timber truss joints
Fauziyah, S.
Soesilohadi, R. C. H.
Retnoaji, B.
Alam, P.
COMPOSITES PART B-ENGINEERING, 2016, 87 : 274 - 280

← 1 2 3 4 5 →