Magnetic abrasive finishing of AZ91 magnesium alloy using electromagnet

被引：19
作者：
Chaurasia, Ankur [1 ]
Rattan, Nav [2 ]
Mulik, Rahul S. [2 ]
机构：
[1] PDPU, Dept Mech Engn, Gandhinagar 382007, Gujrat, India
[2] IIT Roorkee, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India
来源：
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING | 2018年 / 40卷 / 10期
关键词：
Magnetic abrasive finishing (MAF); Magnesium wheel (MAG wheel); Analysis of variance; Flexible magnetic abrasive brush (FMAB);
D O I：
10.1007/s40430-018-1399-7
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The magnesium alloy is widely used in the industry owing to its lightweight and high specific strength applications. In the present work, the effect of different process parameters of magnetic abrasive finishing process (MAF) on surface roughness (Ra) has been studied along with the various forces acting on AZ91 magnesium alloy plate during finishing operation. The average surface roughness Ra' of AZ91 magnesium alloy was examined, and various cutting forces were also measured during finishing with MAF process. Permanent magnet was used on the opposite side of the workpiece and electromagnet in order to improve the strength of magnetic field in this process. In the present study, effects of various process parameters such as working gap, rotational speed and supplied current have been studied on the percentagechange in Ra' and various cutting forces during finishing of AZ91 magnesium alloy. Improvement in surface texture and finishing mechanism during MAF process was also observed with the help of SEM and AFM images.
引用
收藏
页数：10
相关论文
共 18 条
  • [1] Optimization of process parameters affecting surface roughness in magnetic abrasive finishing process
    Ahmad, Shadab
    Gangwar, Swati
    Yadav, Prabhat Chand
    Singh, D. K.
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2017, 32 (15) : 1723 - 1729
  • [2] Buldum B., 2012, International Journal of Electronics Mechanical and Mechatronics Engineering, V2, P261
  • [3] Study on cylindrical magnetic abrasive finishing using unbonded magnetic abrasives
    Chang, GW
    Yan, BH
    Hsu, RT
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (05) : 575 - 583
  • [4] Experimental investigation of external surface finishing of AISI 440C stainless steel cylinders using the magnetic abrasive finishing process
    Choopani, Y.
    Razfar, M. R.
    Saraeian, P.
    Farahnakian, M.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 83 (9-12) : 1811 - 1821
  • [5] Polishing of the aluminum sheets with magnetic abrasive finishing method
    Givi, Mehrdad
    Tehrani, Alireza Fadaei
    Mohammadi, Aminollah
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 61 (9-12) : 989 - 998
  • [6] Effect of carbon nano tube (CNT) particles in magnetic abrasive finishing of Mg alloy bars
    Heng, Lida
    Yang, Gyun Eui
    Wang, Rui
    Kim, Min Soo
    Mun, Sang Don
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (12) : 5325 - 5333
  • [7] Jain VK, 2007, Advanced machining processes
  • [8] Application of magnetic abrasive polishing to composite materials
    Kim, Tae-Wan
    Kang, Dae-Min
    Kwak, Jae-Seob
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2010, 24 (05) : 1029 - 1034
  • [9] Kim TW, 2010, INT J PRECIS ENG MAN, V11, P189, DOI [10.1007/s12541-010-0021-4, 10.1007/S12541-010-0021-4]
  • [10] Determining work-brush interface temperature in magnetic abrasive finishing process
    Mishra, Vivek
    Goel, Harsha
    Mulik, Rahul S.
    Pandey, P. M.
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2014, 16 (02) : 248 - 256
12