Influence of Ti2Cu precipitates on B19 martensite structure in a Ti-rich Ti-Ni-Cu thin film

被引:15
作者
Meng, X. L. [1 ,2 ]
Sato, M. [1 ]
Ishida, A. [1 ]
机构
[1] Natl Inst Mat Sci, Sensor Mat Ctr, Tsukuba, Ibaraki, Japan
[2] Harbin Inst Technol, Dept Mat Phys & Chem, Harbin 150006, Peoples R China
关键词
shape memory alloys; Ti-Ni-Cu thin film; Ti(2)Cu precipitate; martensite; microstructure;
D O I
10.1080/09500830802322152
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The B19 martensite structure of Ti(51.5)Ni(33.1)Cu(15.4) thin films containing the Ti(2)Cu precipitates annealed at 873 K for 1 h has been investigated by transmission electron microscopy. It was found that the Ti(2)Cu precipitates do not stop the shear deformation of martensitic transformation. The Ti(2)Cu precipitates were elastically bent when martensite plates cut through them. However, the Ti(2)Cu precipitates sometimes change the martensite plates in direction or width, suggesting that the Ti(2)Cu precipitates provide a resistance to the growth of martensite plates to some degree.
引用
收藏
页码:575 / 582
页数:8
相关论文
共 50 条
[41]   The B2-B19-B19' Transformation in Ti-(45-x)Ni-5Cu-xMn (at%) (x = 0.5-2.0) Alloys [J].
Jeon, Yeong-Min ;
Kim, Min-Gyun ;
Kim, Min-Su ;
Lee, Yong-Hee ;
Im, Yeon-Min ;
Nam, Tae-Hyun .
TRANSACTIONS ON ELECTRICAL AND ELECTRONIC MATERIALS, 2011, 12 (01) :24-27
[42]   Two-stage B2-B19-B19′ martensitic transformation in a Ti50Ni30Cu20 alloy observed by synchrotron radiation [J].
Miyamoto, H ;
Taniwaki, T ;
Ohba, T ;
Otsuka, K ;
Nishigori, S ;
Kato, K .
SCRIPTA MATERIALIA, 2005, 53 (02) :171-175
[43]   Nanoscale interwoven structure of B2 and R-phase in Ni-Ti alloy film [J].
Zhao, Chunwang ;
Zhao, Shilei ;
Jin, Yongjun ;
Meng, Xiaokai .
VACUUM, 2016, 129 :45-48
[44]   Grain boundary character and precipitates in 15Cr-30Ni-2Ti-3Cu valve alloy after solution treatment [J].
Wang, Shizhou ;
Zhang, Huai ;
Wang, Hui ;
Shi, Chengbin .
JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 1006
[45]   The Influence of Synthesis Conditions on the Phase Composition, Structure, and Properties of the High-Entropy Ti–Cr–Fe–Ni–Cu Alloy [J].
M.V. Marych ;
G.A. Bagliuk ;
A.A. Mamonova ;
A.N. Gripachevskii .
Powder Metallurgy and Metal Ceramics, 2019, 57 :533-541
[46]   Self-accommodation of B19′ martensite in Ti-Ni shape memory alloys - Part I. Morphological and crystallographic studies of the variant selection rule [J].
Nishida, M. ;
Nishiura, T. ;
Kawano, H. ;
Inamura, T. .
PHILOSOPHICAL MAGAZINE, 2012, 92 (17) :2215-2233
[47]   Influence of low-frequency vibrations on the structure of amorphous Ti40.7Hf9.5Ni44.8Cu5 alloy [J].
Belyaev, Sergey ;
Resnina, Natalia ;
Rubanik, Vasili ;
Rubanik, Vasili, Jr. ;
Shelyakov, Alexander ;
Niapomniashchaya, Viktoria ;
Ubyivovk, Eugenii ;
Kasatkin, Igor .
MATERIALS LETTERS, 2017, 209 :231-234
[48]   The Influence of Synthesis Conditions on the Phase Composition, Structure, and Properties of the High-Entropy Ti-Cr-Fe-Ni-Cu Alloy [J].
Marych, M. V. ;
Bagliuk, G. A. ;
Mamonova, A. A. ;
Gripachevskii, A. N. .
POWDER METALLURGY AND METAL CERAMICS, 2019, 57 (9-10) :533-541
[49]   Combinatorial Synthesis and High-Throughput Characterization of Microstructure and Phase Transformation in Ni-Ti-Cu-V Quaternary Thin-Film Library [J].
Al Hasan, Naila M. ;
Hou, Huilong ;
Sarkar, Suchismita ;
Thienhaus, Sigurd ;
Mehta, Apurva ;
Ludwig, Alfred ;
Takeuchi, Ichiro .
ENGINEERING, 2020, 6 (06) :637-643
[50]   The influence of coherent and semi-coherent TiCu precipitates on the martensitic transformation of melt-spun Ti50Ni25Cu25 shape memory ribbons [J].
Rösner, H ;
Schlossmacher, P ;
Shelyakov, AV ;
Glezer, AM .
MATERIALS TRANSACTIONS, 2001, 42 (08) :1758-1762