ADHESIVE BOND PERFORMANCE OF HEAT-TREATED FIR WOOD (ABIES BORRISSIREGIS)

被引：0

作者：

Andromachi, Mitani ^{[1
]}

Ekaterini, Rammou ^{[1
]}

机构：

[1] Technol Educ Inst Larissa, Karditsa Branch, Dept Wood & Furniture Design & Technol, Kardhitsa 43100, Greece

来源：

WOOD RESEARCH | 2018年 / 63卷 / 05期

关键词：

Heat treatment; adhesive; fir wood; bonding; PVAc;

D O I：

暂无

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

The thermal treatment of wood leads to chemical, structural and natural changes in the wood components which can significantly affect the adhesive bond performance of the wood in various ways depending on the type of adhesive that is used. In the present research, fir wood (Abies borrissiregis) was undergone thermal treatment at 180 degrees C, and 200 degrees C for 3, 5 and 7 hours. Two different types of adhesives were used for the adhesive bond: polyurethane (PUR) and polyvinyl acetate PVAc. During all the wood treatment conditions, higher endurance in the bonding shear strength was noticed for the non-modified samples and the shearing strength by compression load was decreased while the thermal treatment was becoming more intense. Generally, while the PVAc bond shows better performance during the adhesion and higher modulus of rupture in comparison with the polyurethane PU after the thermal treatment of the wood.

引用

页码：909 / 916

页数：8

共 13 条

[1] Ahmad M. H., 2000, THESIS
[2] Boonstra MJ, 2007, ANN FOREST SCI, V64, P679, DOI 10.1051/forest:2007048
[3] Cruz M., 2007, Bonding of modified wood. Proceedings of the 5th COST E34 International Workshop, Bled, Slovenia, 6th September, 2007., P95
[4] Hill C.A., 2007, Wood modification: Chemical, thermal and other processes
[5] Ordu M., 2013, International Journal of Physical Sciences, V8, P1029
[6] Paul W, 2007, HOLZ ROH WERKST, V65, P57, DOI 10.1007/s00107-006-0146-4
[7] River Bryan, 1991, TREATISE ADHESION AD, V7
[8] Sahin, 2009, BIORESOURCES, V4, P1545
[9] Bonding performance of heat treated wood with structural adhesives
Sernek, Milan
Boonstra, Michiel
Pizzi, Antonio
Despres, Aurelien
Gerardin, Philippe
[J]. HOLZ ALS ROH-UND WERKSTOFF, 2008, 66 (03) : 173 - 180
[10] Tjeerdsma BF, 1998, HOLZ ROH WERKST, V56, P149, DOI 10.1007/s001070050287

← 1 2 →