Investigation of a new approach for additively manufactured continuous fiber-reinforced polymers

被引：60

作者：

Baumann, Florian ^{[1
]}

Scholz, Julian ^{[2
]}

Fleischer, Juergen ^{[1
]}

机构：

[1] KIT Karlsruhe Inst Technol, Wbk Inst Prod Sci, Kaiserstr 12, D-76131 Karlsruhe, Germany

[2] Apium Addit Technol GmbH, Willy Andreas Allee 19, D-76131 Karlsruhe, Germany

来源：

1ST CIRP CONFERENCE ON COMPOSITE MATERIALS PARTS MANUFACTURING (CIRP CCMPM 2017) | 2017年 / 66卷

关键词：

Rapid prototyping; Fiber reinforced plastic; Fused layer manufacturing;

D O I：

10.1016/j.procir.2017.03.276

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

First additive manufacturing processes (AM) for the production of fiber reinforced plastics (FRP) have been developed, which use Fused Layer Modelling (FLM) processes by implementing the fibers into the matrix material prior to extruding or within the nozzle. A method for implementing the fibers outside of the printing nozzle and outside of the thermoplastic filaments directly into the part while it is being manufactured has not yet been analyzed properly. This study shows the gain in tensile strength and Young's modulus for different implementation methods of glass and carbon fibers on the building platform. (C) 2017 The Authors. Published by Elsevier B.V.

引用

页码：323 / 328

页数：6

共 12 条

[1]

Ehrenstein G.W., 2006, Faserverbund-Kunststoffe: Werkstoffe, Verarbeitung, Eigenschaften, 2

[2]

Fraunhofer-Institut fur Produktionstechnik und Automatisierung IPA, 2013, INT KUND FRAUNH IPA

[3]

Gebhardt A., 2016, Additive Manufacturing Und 3D-Drucken Fr Prototyping-Tooling-Produktion: additive Fertigungsverfahren, Vfifth

[4]

Haspel B., 2015, WERKSTOFFANALYTISCHE

[5] Composite rapid prototyping: overcoming the drawback of poor mechanical properties [J].

Karalekas, D ;

Antoniou, K .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 153 :526-530

[6] Study of the mechanical properties of nonwoven fibre mat reinforced photopolymers used in rapid prototyping [J].

Karalekas, DE .

MATERIALS & DESIGN, 2003, 24 (08) :665-670

[7]

Kirsten Tanja, LEICHTBAU 3D DRUCKER

[8]

Molitch-Hou M., AREVO LABS WANT SEE

[9] Dieless forming of carbon fibre reinforced plastic parts using 3D printer [J].

Mori, Ken-ichiro ;

Maeno, Tomoyoshi ;

Nakagawa, Yuki .

11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 :1595-1600

[10] Design for Fiber-Reinforced Additive Manufacturing [J].

Pruess, Hauke ;

Vietor, Thomas .

JOURNAL OF MECHANICAL DESIGN, 2015, 137 (11)

← 1 2 →