Prediction of fatigue life in cold expanded fastener holes subjected to bolt tightening in Al alloy 7075-T6 plate

被引：35
|
作者：
Taghizadeh, H. [1 ]
Chakherlou, T. N. [1 ]
Ghorbani, H. [1 ]
Mohammadpour, A. [1 ]
机构：
[1] Univ Tabriz, Fac Mech Engn, Tabriz, Iran
来源：
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | 2015年 / 90卷
关键词：
Cold expansion; Bolt clamping; Fatigue life; Residual stress; Finite element; CLAMPING FORCE; RESIDUAL-STRESSES; EXPANSION; BEHAVIOR; THICKNESS; JOINTS; SIZE;
D O I：
10.1016/j.ijmecsci.2014.10.026
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this paper, stress analysis of holed plates was implemented in order to estimate the fatigue life due to the combined effect of cold expansion and bolt tightening (clamping force). The fatigue life was divided into two phases of crack initiation life and fatigue crack growth life. The fatigue crack initiation and fatigue crack growth life estimations have been investigated numerically and the total estimated fatigue lives have been compared with the available experimental fatigue test results. To obtain the residual stress, pre-stress and strain distributions created by cold expansion and bolt clamping force, and also the stress and strain distributions under cyclic longitudinal loads, three-dimensional finite element models were employed using ANSYS software. The results obtained from the finite element analysis of cold expansion and bolt clamping were employed to predict the fatigue crack initiation life using Fatemi-Socie multiaxial fatigue criterion, and fatigue crack growth life using AFGROW computer code. The results show that there is a good agreement between the numerically predicted total fatigue life and experimental fatigue test results. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：6 / 15
页数：10
相关论文
共 50 条
  • [1] On the fatigue behavior of cold expanded fastener holes subjected to bolt tightening
    Chakherlou, T. N.
    Alvandi-Tabrizi, Y.
    Kiani, A.
    INTERNATIONAL JOURNAL OF FATIGUE, 2011, 33 (06) : 800 - 810
  • [2] Fatigue behavior of interference fitted Al-alloy 7075-T651 specimens subjected to bolt tightening
    Taghizadeh, H.
    Chakherlou, T. N.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2019, 233 (09) : 1879 - 1893
  • [3] The effect of electroless Ni-P coatings on the fatigue life of Al 7075-T6 fastener holes with symmetrical slits
    Rahmat, M. A.
    Oskouei, R. H.
    Ibrahim, R. N.
    Raman, R. K. Singh
    INTERNATIONAL JOURNAL OF FATIGUE, 2013, 52 : 30 - 38
  • [4] An FE analysis for assessing the effect of short-term exposure to elevated temperature on residual stresses around cold expanded fastener holes in aluminum alloy 7075-T6
    Aghdam, A. B.
    Chakherlou, T. N.
    Saeedi, K.
    MATERIALS & DESIGN, 2010, 31 (01) : 500 - 507
  • [5] An Numerical Investigation on the Effect of the Combination of Cold Expansion and Interference Fitting on Fatigue Life Improvement of a 7075-T6 Aluminum Alloy Single Plate
    Huang, Yongjie
    Guan, Zhidong
    Li, Zengshan
    Liu, Faqi
    He, Yamei
    Dan, Hu
    2017 8TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING (ICMAE), 2017, : 632 - 638
  • [6] Effect of split sleeve cold expansion on microstructure and fatigue performance of 7075-T6 aluminum alloy holes
    Wang, Chenguang
    Zou, Fan
    Zhou, Entao
    Fan, Zhilei
    Ge, Ende
    An, Qinglong
    Ming, Weiwei
    Chen, Ming
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 167
  • [7] The influence of corrosion pits and cold expanded fastener holes on the fatigue life aluminium 7075-T651
    Withy, Benjamin
    Campbell, Stephen
    Stephen, Glenn
    11TH INTERNATIONAL FATIGUE CONGRESS, PTS 1 AND 2, 2014, 891-892 : 87 - +
  • [8] Combined Cold Expansion and Friction Stir Processing of Fastener Holes in Aluminum Alloy Al-2014-T6
    Panaskar, Nitin J.
    Sharma, Abhay
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2017, 70 (01) : 107 - 114
  • [9] Fatigue Crack Growth Rates in Friction Stir Welding Joints of 7075-T6 Al Alloy and Fatigue Life Prediction based on AFGROW
    Zou, Binlian
    Yang, Xinqi
    Chen, Jiahua
    MATERIALS PROCESSING TECHNOLOGY, 2011, 337 : 507 - 510
  • [10] Environmental Fatigue of 7075-T6 Aluminum Alloy
    Ebara, R.
    McEvily, A. J.
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS IX, 2011, 452-453 : 13 - +
12345