Experimental Research and Optimization of Characteristic Parameters of the Valve Plate of the Axial Piston Pump/Motor

被引：2
|
作者：
Petrovic, R. [1 ]
Andjelkovic, M. [1 ]
Radosavljevic, M. [1 ]
Todic, N. [2 ]
机构：
[1] Univ Union Nikola Tesla Belgrade, Fac Strateg & Operat Management Belgrade, Belgrade, Serbia
[2] Univ Kragujevac, Fac Mech & Civil Engn, Kraljevo, Serbia
来源：
LATEST METHODS OF CONSTRUCTION DESIGN | 2016年
关键词：
Piston pump; Geometrical flow section; Radial clearance; Diameter of cylinder; Numbers of cylinders; Dynamic viscosity; Modulus of elasticity; Flow coefficient; Dynamic processes; The driving shaft angle; Experiment;
D O I：
10.1007/978-3-319-22762-7_27
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Modern design of the axial piston pump/motor, based on computer aided design, requires description of all processes and parameters in the pump/motor. The hydrodynamic and dynamic processes in the axial piston pump (cylinder, intake and discharge chambers, discharge valve, and high pressure pipeline) are very complex, so they demand a thorough physical and mathematical analysis. Compression losses, which are caused by sudden pressure changes in the cylinders of cylinder block, result in energy loss and increased noise. The compression losses can be decreased by identification of optimal dimensions and shapes of the port at the valve plate.
引用
收藏
页码：173 / 183
页数：11
相关论文
共 50 条
  • [1] Research and simulation on valve plate of water hydraulic axial piston pump (motor)
    Nie, S.-L.
    Li, Z.-Y.
    Jixie Kexue Yu Jishu/Mechanical Science and Technology, 2001, 20 (03): : 407 - 409
  • [2] Noise Reduction of an Axial Piston Pump by Valve Plate Optimization
    Shao-Gan Ye
    Jun-Hui Zhang
    Bing Xu
    Chinese Journal of Mechanical Engineering, 2018, 31
  • [3] Noise Reduction of an Axial Piston Pump by Valve Plate Optimization
    Ye, Shao-Gan
    Zhang, Jun-Hui
    Xu, Bing
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2018, 31 (01)
  • [4] Noise Reduction of an Axial Piston Pump by Valve Plate Optimization
    Shao-Gan Ye
    Jun-Hui Zhang
    Bing Xu
    Chinese Journal of Mechanical Engineering, 2018, 31 (03) : 85 - 100
  • [5] Mathematical Modeling and Experimental Research of Characteristic Parameters Hydrodynamic Processes of a Piston Axial Pump
    Petrovic, Radovan
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2009, 55 (04): : 224 - 229
  • [6] Experimental and Analytical Investigation of Floating Valve Plate Motion in an Axial Piston Pump
    Richardson, David
    Sadeghi, Farshid
    Rateick, Richard G., Jr.
    Rowan, Scott
    TRIBOLOGY TRANSACTIONS, 2017, 60 (03) : 537 - 547
  • [7] Effect of Surface Texturing Parameters on the Lubrication Characteristics of an Axial Piston Pump Valve Plate
    Wang, Zhaoqiang
    Hu, Shan
    Zhang, Hengyun
    Ji, Hong
    Yang, Jian
    Liang, Wei
    LUBRICANTS, 2018, 6 (02)
  • [8] Structure optimization of triangular groove of valve plate in axial piston pump based on SVR
    Zhang B.
    Cheng G.-Z.
    Hong H.-C.
    Zhao C.-X.
    Bai D.-P.
    Yang H.-Y.
    Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2021, 51 (04): : 1213 - 1221
  • [9] Dynamic Modeling and Characteristic Study of the Floating Valve Plate Piston Pump-Motor System
    Wang, Hujiang
    Wang, Tao
    Lin, Yu
    Du, Fu
    Feng, Wentao
    Qiche Gongcheng/Automotive Engineering, 2024, 46 (11): : 2122 - 2132
  • [10] Experimental verification of oil whirl of piston in axial piston pump and motor
    Tanaka, K
    Nakahara, T
    Kyogoku, K
    JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 2001, 44 (01): : 230 - 236
12345