Development of a computer code for the interpretation of results of hot plane strain compression tests

被引：38
作者：
Kowalski, B
Sellars, CM
Pietrzyk, M
机构：
[1] Akad Gorniczo Hutnicza, Wydzial Met & Inzynierii Mat, PL-30059 Krakow, Poland
[2] Univ Sheffield, Inst Microstruct & Mech Proc Engn, IMMPETUS, Sheffield S1 3JD, S Yorkshire, England
来源：
ISIJ INTERNATIONAL | 2000年 / 40卷 / 12期
关键词：
constitutive equations; optimisation; FE modelling; dynamic recrystallisation; steel; plane strain compression;
D O I：
10.2355/isijinternational.40.1230
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In the present work an investigation of constitutive equations is made to obtain good fit to experimental data and ensure proper extrapolation out of experimental range of plane strain compression tests to low and high values of Zener-Hollomon parameter, which are required in finite element modelling. A computer program for optimisation of rheological parameters,of material was developed. Optimisation using experimental data for two ultra low carbon steels was made and the results are compared with measured stress-strain curves. The obtained constitutive equations were used in the finite element model and comparison between experimental and computed displacement-force curves is made. The influence of inhomogeneity of strain rate, strain and temperatures distribution during compression tests on flow curves is illustrated.
引用
收藏
页码：1230 / 1236
页数：7
相关论文
共 18 条
  • [11] MALINOWSKI Z, 1995, P C APPL MATH METH S, V2, P43
  • [12] Nedler JA, 1965, COMPUT J, V7, P308
  • [13] Pietrzyk M., 1993, CIRP Ann., V42, P331, DOI [10.1016/S0007-8506(07)62455-X, DOI 10.1016/S0007-8506(07)62455-X]
  • [14] Pietrzyk M., 1991, Thermal-Mechanical Modelling of the Flat Rolling Process
  • [15] PIETRZYK M, 1995, P COMPLAS, V4, P889
  • [16] Sellars CM, 1995, IRONMAK STEELMAK, V22, P459
  • [17] SELLARS CM, 1966, MEM ETUD SCI REV MET, V63, P731
  • [18] Interpretation of hot plane strain compression testing of aluminium specimens
    Silk, NJ
    van der Winden, MR
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 1999, 15 (03) : 295 - 300
12