Process characterization of 40Cr Steel Roller by Laser Surface Alloying with Rare Earths Oxide Y2O3

被引：0
|
作者：
Wu, Anqi [1 ]
Liu, Qibin [2 ]
Qin, Shuijie [1 ]
机构：
[1] Guizhou Univ, Key Lab Photoelect Technol & Applicat, Guiyang 550025, Peoples R China
[2] Guizhou Univ, Coll Mat Met, Guiyang 550003, Peoples R China
来源：
MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3 | 2011年 / 295-297卷
关键词：
Laser technique; 40Cr steel; Laser surface alloying; Rare earth oxide Y2O3; MICROSTRUCTURE; COATINGS;
D O I：
10.4028/www.scientific.net/AMR.295-297.520
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
To increase the mechanical properties of the metal rollers, Mo and Mo+Y2O3 alloy powders were designed. And a kind of coating fabricated by a continuous wave CO2 laser surface alloying(LSA) on 40Cr steel roller was obtained. The effect of Mo and Mo+Y2O3 on microstructure, hardness and wearing resistance of alloying coating were studied by OM, SEM, XRD, microhardness tester and wearing tester. The experimental results indicate that the grain size in alloying coating is obviously fined, and the grain boundary is strengthened. The uniformity and density of microstructure are improved. The microhardness and wear resistance of alloying coating are significantly increased.
引用
收藏
页码：520 / +
页数：2
相关论文
共 39 条
  • [31] Structure of complex oxide nanoparticles in a Fe-14Cr-2W-0.3Ti-0.3Y2O3 ODS RAF steel
    Unifantowicz, P.
    Plocinski, T.
    Williams, C. A.
    Schaeublin, R.
    Baluc, N.
    JOURNAL OF NUCLEAR MATERIALS, 2013, 442 (1-3) : S158 - S163
  • [32] Synthesis of Nanocrystalline Al10Co25Cr8Fe15Ni36Ti6 Alloys Dispersed with Y2O3 by Mechanical Alloying Method
    Sahu, Tukesh Ram
    Soni, Vinay Kumar
    Ganguly, Subhas
    Sinha, Sudip K.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2025, 78 (05)
  • [33] Erosion tribo performance of HVOF deposited WC-10Co-4Cr and WC-10Co-4Cr+2%Y2O3 micron layers on pump impeller steel
    Singh, Gurmeet
    Kumar, Satish
    Sehgal, Satbir S.
    PARTICULATE SCIENCE AND TECHNOLOGY, 2020, 38 (01) : 34 - 44
  • [34] Optimization mechanism of bonding strength of laser melting deposited tungsten/reduced activation steel heterogeneous interface via addition of Y2O3 by magnetron sputtering
    Jiang, Wenjuan
    Xia, Zhixin
    Xu, Jiachao
    Zhao, Dong
    Xia, Shaoqiu
    Wang, Liang
    FUSION ENGINEERING AND DESIGN, 2020, 157 (157)
  • [35] Microstructure and Properties of 35.8%Fe-20%Ti-20%Al-24%Cr-0.2%Y2O3 Coatings Prepared by Laser Cladding
    Jiang Hongyi
    Zhao Xinyi
    Li Tianqing
    Zhu Qiang
    Wang Dan
    Lei Yucheng
    LASER & OPTOELECTRONICS PROGRESS, 2022, 59 (19)
  • [36] Effect of rare earth oxide (Y2O3) addition on wear characteristic of TiB2 ceramic reinforced Mo-based composite coating fabricated by Argon shielded Arc cladding
    Kumar, Ravi
    Das, Anil Kumar
    PHYSICA SCRIPTA, 2023, 98 (08)
  • [37] Effect of Y2O3 on microstructural characteristics and wear resistance of cobalt-based composite coatings produced on TA15 titanium alloy surface by laser cladding
    Lu, Donghua
    Liu, Shasha
    Zhang, Xiaoyu
    Zhang, Weiping
    SURFACE AND INTERFACE ANALYSIS, 2015, 47 (02) : 239 - 244
  • [38] Effects of Cr2O3 active agent on the weld process dynamic behavior and joint comprehensive properties of fiber laser welded stainless steel thick plate
    Mei, Lifang
    Yan, Dongbing
    Xie, Shun
    Lei, Zhiqin
    Ge, Xiaohong
    OPTICS AND LASERS IN ENGINEERING, 2020, 128
  • [39] Microstructure and Mechanical Properties of Y4Zr3O12-Added Fe-13.5Cr-2W Oxide-Dispersion-Strengthened Steels, Containing High Contents of C and N, Prepared by Mechanical Alloying and Two-Step Spark Plasma Sintering
    Wu, Yiheng
    Huang, Qunying
    Zhang, Ligang
    Jiang, Yong
    Zhu, Gaofan
    Shen, Jingjie
    MATERIALS, 2023, 16 (06)
1234