Manufacturing of unidirectional glass/epoxy prepreg with microencapsulated liquid healing agents

被引:18
|
作者
Kim, Sang Yup [1 ,4 ]
Jones, Amanda R. [1 ,4 ]
Sottos, Nancy R. [2 ,4 ]
White, Scott R. [3 ,4 ]
机构
[1] Univ Illinois, Dept Mech Sci & Engn, 1206 W Green St, Urbana, IL 61801 USA
[2] Univ Illinois, Dept Mat Sci & Engn, 1304 W Green St, Urbana, IL 61801 USA
[3] Univ Illinois, Dept Aerosp Engn, 104 S Wright St, Urbana, IL 61801 USA
[4] Univ Illinois, Beckman Inst Adv Sci & Technol, 405 N Mathews Ave, Urbana, IL 61801 USA
关键词
Functional composites; Laminate; DMA; Filament winding; Confocal fluorescent microscopy; STRUCTURAL COMPOSITE; POLYMERIC MATERIALS; DAMAGE;
D O I
10.1016/j.compscitech.2017.10.017
中图分类号
TB33 [复合材料];
学科分类号
摘要
Unidirectional glass/epoxy prepreg with embedded microcapsules containing a liquid healing agent was developed for the fabrication of laminated self-healing fiber-reinforced polymer matrix composites (PMCs). Microcapsules containing a liquid healing agent were distributed throughout a prepreg fabric using a custom designed prepregger. The microcapsules of ca. 2.5 mu m in diameter resided in the fiber interstitial spaces and remained intact during prepregging and subsequent hot-pressing of laminated composites. The prepreg fabric displayed uniform distribution of microcapsules within the fiber yarns and throughout the fabric. Laminated composites produced with the prepreg attained 0.56 fiber volume fraction with 0.063 microcapsule volume fraction distributed uniformly throughout the composite. Embedded microcapsules within the laminated composites lead to a small reduction in transverse storage modulus and glass transition temperature. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:190 / 197
页数:8
相关论文
共 50 条
  • [1] Manufacture of carbon-fiber prepreg with thermoplastic/epoxy resin blends and microencapsulated solvent healing agents
    Kim, Sang Yup
    Lim, Tae-Wook
    Sottos, Nancy R.
    White, Scott R.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2019, 121 : 365 - 375
  • [2] Pyrolysis characteristics of unidirectional carbon fiber/epoxy prepreg
    Xu Y.
    Yang Y.
    Zhang Y.
    Wang Z.
    Wang, Zhi (wangzhi@sau.deu.cn), 2018, Beijing University of Aeronautics and Astronautics (BUAA) (35): : 2442 - 2448
  • [3] Microencapsulated healing agents for an elevated-temperature cured epoxy: Influence of viscosity on healing efficiency
    Ghazali, Habibah
    Ye, Lin
    Amir, Amie N.
    POLYMERS & POLYMER COMPOSITES, 2021, 29 (9_SUPPL): : S1317 - S1327
  • [4] Characterization of prepreg-prepreg and prepreg-tool friction for unidirectional carbon fiber/epoxy prepreg during hot diaphragm forming process
    Zhao, Yueqing
    Zhang, Tao
    Li, Hongfu
    Zhang, Boming
    POLYMER TESTING, 2020, 84
  • [5] Influence of coupling agents on the properties of glass fiber/epoxy unidirectional laminated plate
    Chen, Ping
    Liu, Shengping
    Zhang, Xianyou
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 1993, 10 (04): : 65 - 69
  • [6] In-situ measurement and numerical simulation of resin pressure during Glass/Epoxy prepreg composite manufacturing
    Ganapathi, A. S.
    Maheshwari, Muneesh
    Joshi, Sunil C.
    Chen, Zhong
    Asundi, A. K.
    Tjin, Swee Chuan
    MEASUREMENT, 2016, 94 : 505 - 514
  • [7] Quality Determination of Glass/Epoxy Prepreg by NIR Spectroscopy
    Li, Wei
    Gao, Wei Jia
    Chen, Ping
    Sun, Bao Lei
    NEW MATERIALS AND ADVANCED MATERIALS, PTS 1 AND 2, 2011, 152-153 : 77 - 80
  • [8] In-plane deformation behavior of unidirectional carbon fiber/epoxy prepreg layups
    Chen P.
    Zhao Y.
    Chen F.
    Zhang B.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2020, 37 (05): : 1049 - 1055
  • [9] A study on the curing behaviors of glass/epoxy prepreg by dielectrometer and the thermal properties of cured glass/epoxy composites
    Gal, YS
    Lee, WC
    Jeon, YJ
    Yoon, NG
    POLYMER-KOREA, 2000, 24 (03) : 350 - 357
  • [10] A New Approach for Determination of Gel Time of a Glass/Epoxy Prepreg
    Hayaty, Mehran
    Beheshty, Mohammad Hosain
    Esfandeh, Masoud
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 120 (03) : 1483 - 1489