Influence of high temperature heat treatment on microstructure and microhardness of (DS)NiAl-Cr(Mo)-Hf eutectic alloy

被引：0
作者：
Xu, CM
Guo, JT [1 ]
Fu, HZ
机构：
[1] Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
[2] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China
来源：
ACTA METALLURGICA SINICA | 2004年 / 40卷 / 01期
关键词：
NiAl; directionally solidification; high temperature heat treatment; microstructure; microhardness;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The influence of high temperature heat treatment on microstructure and microhardness of (DS)NiAl-Cr(Mo)-Hf eutectic alloy fabricated with directional solidification under high temperature gradient was investigated. The results indicate that there is little change in the morphology of NiAl and Cr(Mo) phases after high temperature heat treatment. But the semicontinuous Heusler phase which is originally located on the grain boundaries is partially reduced and fine Heusler particles re-precipitated within NiAl matrix. Furthermore, NiAl precipitates coarsen in the Cr(Mo) phase and dislocation appears in the Cr(Mo) phase. Microhardness of as-fabricated (DS)NiAl-28Cr-5Mo-1Hf alloy is much higher than that of (DS)NiAl-28Cr-6Mo and basically unchanged after heat treatment.
引用
收藏
页码：57 / 61
页数：5
相关论文
共 14 条
[1]   CORRELATION OF DEFORMATION MECHANISMS WITH THE TENSILE AND COMPRESSIVE BEHAVIOR OF NIAL AND NIAL(ZR) INTERMETALLIC ALLOYS [J].
BOWMAN, RR ;
NOEBE, RD ;
RAJ, SV ;
LOCCI, IE .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1992, 23 (05) :1493-1508
[2]  
CHEN RS, 2000, MATER LETT, V42, P80
[3]   DEFORMATION AND FRACTURE OF A DIRECTIONALLY SOLIDIFIED NIAL-28CR-6MO EUTECTIC ALLOY [J].
CHEN, XF ;
JOHNSON, DR ;
NOEBE, RD ;
OLIVER, BF .
JOURNAL OF MATERIALS RESEARCH, 1995, 10 (05) :1159-1170
[4]  
CLINE HE, 1970, METALL TRANS, V1, P2907
[5]  
Cui Chuanyong, 1999, Acta Metallurgica Sinica, V35, P477
[6]   Deformation behavior and microstructure of DS NiAl/Cr(Mo) alloy containing Hf [J].
Cui, CY ;
Guo, JT ;
Qi, YH ;
Ye, HQ .
INTERMETALLICS, 2002, 10 (10) :1001-1009
[7]   Brittle-to-ductile transition in multiphase NiAl alloy [J].
Cui, CY ;
Chen, YX ;
Guo, JT ;
Qi, YH ;
Ye, HQ .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 325 (1-2) :186-193
[8]   THE FRACTURE-RESISTANCE OF DIRECTIONALLY SOLIDIFIED DUAL-PHASE NIAL REINFORCED WITH REFRACTORY-METALS [J].
HEREDIA, FE ;
HE, MY ;
LUCAS, GE ;
EVANS, AG ;
DEVE, HE ;
KONITZER, D .
ACTA METALLURGICA ET MATERIALIA, 1993, 41 (02) :505-511
[9]   Preliminary investigation of in-situ multi-phase composite NiAl/Cr(Mo)-TiC [J].
Jiang, DT ;
Guo, JT .
MATERIALS LETTERS, 1998, 36 (1-4) :33-37
[10]   PROCESSING AND MECHANICAL-PROPERTIES OF IN-SITU COMPOSITES FROM THE NIAL-CR AND THE NIAL-(CR,MO) EUTECTIC SYSTEMS [J].
JOHNSON, DR ;
CHEN, XF ;
OLIVER, BF ;
NOEBE, RD ;
WHITTENBERGER, JD .
INTERMETALLICS, 1995, 3 (02) :99-113
12