Detection of microdroplet size and speed using capacitive sensors

Detection of the presence, size and speed of microdroplets in microfluidic devices is presented using commercially available capacitive sensors which make the droplet based microfluidic systems scalable and inexpensive. Cross-contamination between the droplets is eliminated by introducing a passivation layer between the sensing electrodes and droplets. A simple T-junction generator is used to generate droplets in microchannels. Coplanar electrodes are used to form a capacitance through the microfluidic channel. The change in capacitance due to the presence of a droplet in the sensing area is detected and used to determine the size and speed of the droplet. The design of a single pair of electrodes is used to detect the presence of a droplet and the interdigital finger design is used to detect the size and speed of the droplet. An analytical model is developed to predict the detection signal and guide the experimental optimization of the sensor geometry. The measured droplet information is displayed through a Labview interface in real-time. The use of capacitance sensors to monitor droplet sorting at a T-junction is also presented. The discussions in this paper can be generalized to any droplet detection application and can serve as a guideline in sensor selection. (C) 2011 Elsevier B.V. All rights reserved.