Design Analysis of Heterojunction Solar Cells with Aligned AZO Nanorods Embedded in p-type Si wafer

Higher price-per-watt of silicon (Si) solar cells is still the main bottleneck in their widespread use for power generation due to their expensive manufacturing process. The n-type zinc oxide (n-ZnO) and p-type Si (p-Si) based single heterojunction solar cell is one of the several methods being tried to replace conventional Si single homojunction solar cell technology. In this work, we have explored the possibility of producing photovoltaic materials by employing RF sputtering and hydrothermal technologies. Conductivity of ZnO nanorods has been increased by aluminium (Al) doping. The advantages of using Al doped ZnO (AZO) nanorods (NRs) have been investigated. The integrated reflectance (IR) has been found to be only similar to 2.86%. Hence, the short circuit current density (J(sc)) has been increased by minimizing the reflection loss of solar cells. AZO NR array have been developed over several large area (3 '' x 3 '') textured p-Si wafers to confirm the repeatability. The maximum efficiency of AZO NRs/Si solar cell of 0.8 cm(2) area has been found to be 6.25% for textured p-type Si wafer which is much higher than reported hitherto for this type of solar cell. A simple, low temperature, low cost procedure is thus being proposed, which has the potential of attaining lower cost of production of heterojunction silicon solar cells.