On the estimation of error in measuring the residual stress by strain gauge rosette

被引：47

作者：

Giri, A. ^{[1
]}

Pandey, C. ^{[1
]}

Mahapatra, M. M. ^{[1
]}

Sharma, K. ^{[2
]}

Singh, P. K. ^{[2
]}

机构：

[1] Indian Inst Technol, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India

[2] Bhabha Atom Res Ctr, Mumbai 400085, Maharashtra, India

来源：

MEASUREMENT | 2015年 / 65卷

关键词：

Blind hole drilling technique; Plasticity error; Residual stresses; Finite element method; Stress ratio; HOLE DRILLING METHOD; PLASTICITY;

D O I：

10.1016/j.measurement.2014.12.047

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The blind hole drilling technique, utilized for measuring residual stress by using strain gauge rosette, is associated with plastic deformation of material that is removed from the hole and also with stress concentration effect of multi point cutting tool. Further, the plasticity effect is also induced in presence of high applied stress which may lead to local yielding of the hole boundary. The present paper describes the plasticity and stress concentration effects of blind hole drilling technique on the calculation of residual stresses for SS 304L and modified Cr-Mo Grade 91 alloys. For uniaxial loading, the responses of strain gauge rosettes were investigated experimentally through tensile testing and for biaxial loading through numerical modeling. Correlations were developed to directly calculate the corrected values of residual stresses from the experimental strain data obtained through the strain gauge rosette and from stress values as per ASTM E837-13. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：41 / 49

页数：9

共 16 条

[1]

[Anonymous], P 5 INT C EXP MECH

[2]

[Anonymous], 2008, E83713 ASTM

[3] Experimental verification of the hole drilling plasticity effect correction [J].

Beghini, M. ;

Santus, C. ;

Valentini, E. ;

Benincasa, A. .

RESIDUAL STRESSES VIII, 2011, 681 :151-+

[4] A procedure for evaluating high residual stresses using the blind hole drilling method, including the effect of plasticity [J].

Beghini, M. ;

Bertini, L. ;

Santus, C. .

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2010, 45 (04) :301-318

[5] Analysis of the effects of strain measurement errors on residual stresses measured by incremental hole-drilling method [J].

Casavola, Caterina ;

Pappalettera, Giovanni ;

Pappalettere, Carmine ;

Tursi, Francesca .

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2013, 48 (05) :313-320

[6]

Gibmeier J, 2004, MATER SCI RES INT, V10, P21

[7] Plastic deformation during application of the hole-drilling method [J].

Gibmeier, J ;

Kornmeier, M ;

Scholtes, B .

ECRS 5: PROCEEDINGS OF THE FIFTH EUROPEAN CONFERENCE ON RESIDUAL STRESSES, 2000, 347-3 :131-136

[8] ERROR INDUCED BY LOCAL YIELDING AROUND HOLE IN HOLE DRILLING METHOD FOR MEASURING RESIDUAL-STRESS OF MATERIALS [J].

LIN, YC ;

CHOU, CP .

MATERIALS SCIENCE AND TECHNOLOGY, 1995, 11 (06) :600-604

[9]

Michaleris P., 1997, WELD J, V76, p172s

[10] Experimental and numerical study of measuring high welding residual stresses by using the blind-hole-drilling technique [J].

Moharami, R. ;

Sattari-Far, I. .

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2008, 43 (03) :141-148

← 1 2 →