Hybrid nanocomposites containing carbon nanotubes and graphite nanoplatelets

被引:162
作者
Li, Jing [1 ]
Wong, Pui-Shan [1 ]
Kim, Jang-Kyo [1 ]
机构
[1] Hong Kong Univ Sci & Technol, Dept Mech Engn, Hong Kong, Hong Kong, Peoples R China
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 483-84卷
关键词
carbon nanotube; graphite nanoplatelet; hybrid nanocomposites;
D O I
10.1016/j.msea.2006.08.145
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The effects of hybrid carbon nanotubes (CNT) and graphite nanoplatelets (GNPs) on the mechanical and electrical properties of epoxy nanocomposites were studied. When the total reinforcement contents is fixed at 2 wt.%, the nanocomposite containing 1% GNP and 1% CNT achieves the highest electrical conductivity of 4.7 x 10(-3) S/cm, which is more than two orders of magnitude higher than that of nanocomposites with 2 wt.% GNP alone. Although the flexural properties are only marginally changed by hybridization, the quasi-static fracture toughness can be enhanced significantly by increasing the CNT content. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:660 / 663
页数:4
相关论文
共 8 条
[1]   Carbon nanotube-reinforced epoxy-compo sites:: enhanced stiffness and fracture toughness at low nanotube content [J].
Gojny, FH ;
Wichmann, MHG ;
Köpke, U ;
Fiedler, B ;
Schulte, K .
COMPOSITES SCIENCE AND TECHNOLOGY, 2004, 64 (15) :2363-2371
[2]  
Kim J.K., 1998, ENG INTERFACES FIBER, V1st
[3]   Conductive graphite nanoplatelet/epoxy nanocomposites: Effects of exfoliation and UV/ozone treatment of graphite [J].
Li, J ;
Kim, JK ;
Sham, ML .
SCRIPTA MATERIALIA, 2005, 53 (02) :235-240
[4]   Morphology and properties of UV/ozone treated graphite nanoplatelet/epoxy nanocomposites [J].
Li, Jing ;
Sham, Man Lung ;
Kim, Jang-Kyo ;
Marom, Gad .
COMPOSITES SCIENCE AND TECHNOLOGY, 2007, 67 (02) :296-305
[5]   Formation of percolating networks in multi-wall carbon-nanotube-epoxy composites [J].
Martin, CA ;
Sandler, JKW ;
Shaffer, MSP ;
Schwarz, MK ;
Bauhofer, W ;
Schulte, K ;
Windle, AH .
COMPOSITES SCIENCE AND TECHNOLOGY, 2004, 64 (15) :2309-2316
[6]   Surface functionalities of multi-wall carbon nanotubes after UV/Ozone and TETA treatments [J].
Sham, ML ;
Kim, JK .
CARBON, 2006, 44 (04) :768-777
[7]   Mode I interlaminar fracture behavior and mechanical properties of CFRPs with nanoclay-filled epoxy matrix [J].
Siddiqui, Naveed A. ;
Woo, Ricky S. C. ;
Kim, Jang-Kyo ;
Leung, Christopher C. K. ;
Munir, Arshad .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (02) :449-460
[8]   Dispersion and alignment of carbon nanotubes in polymer matrix: A review [J].
Xie, XL ;
Mai, YW ;
Zhou, XP .
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2005, 49 (04) :89-112