A Kalman-filter method for power control in broadband wireless networks

被引：25

作者：

Leung, KK ^{[1
]}

机构：

[1] AT&T Bell Labs, Red Bank, NJ 07701 USA

来源：

IEEE INFOCOM '99 - THE CONFERENCE ON COMPUTER COMMUNICATIONS, VOLS 1-3, PROCEEDINGS: THE FUTURE IS NOW | 1999年

关键词：

D O I：

10.1109/INFCOM.1999.751485

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

A Kalman-filter method for power control is proposed for broadband, packet-switched TDMA wireless networks. By observing the temporal correlation of cochannel interference when transmitters can send data contiguously, a Kalman filter is used to predict interfence power in the future. Based on the predicted interference and estimated path gain between the transmitter and receiver, transmission power is determined to achieve a desired signal-to-interference-plus-noise ratio (SINR). Performance results reveal that the Kalman-filter method for power control provides a significant performance improvement. Specifically, when a message consists of 10 packets on average, the 90 and 95 percentile of the SINR by the new method are 3.94 and 5.53 dB above those when no power control is in use, and lie just 0.73 and 1.04dB below the upper-bound performance of the optimal power control, respectively, in a system with 4-sector cells and an interleaved frequency assignment of a reuse factor of 2/8 [WL98]. As a by-product, these results show that the cell layout and assignment scheme combined with the new method for power control can be used to support high-speed data services.

引用

页码：948 / 956

页数：9

共 23 条

[1]

Andersin M, 1997, IEEE VTC P, P1089, DOI 10.1109/VETEC.1997.600498

[2]

ANDERSIN M, 1996, P IEEE 46 VEH TECHN, P742

[3] SIGNAL AND INTERFERENCE STATISTICS OF A CDMA SYSTEM WITH FEEDBACK POWER-CONTROL .2. [J].