Cold-formed steel trusses with semi-rigid joints

被引：24

作者：

Dubina, D ^{[1
]}

Zaharia, R ^{[1
]}

机构：

[1] Politehn Univ Timisoara, Dept Steel Struct & Struct Mech, RO-1900 Timisoara, Romania

来源：

THIN-WALLED STRUCTURES | 1997年 / 29卷 / 1-4期

关键词：

D O I：

10.1016/S0263-8231(97)00028-1

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

An experimental research program aiming to evaluate the semi-rigid behaviour of some typical bolted connections, that are used in cold-formed steel plane truss joints, was carried out in the Laboratory of CMMC Department of The 'Politehnica' University of Timisoara. From the experimental values of the resistant moment and initial stiffness of the joints, the semi-rigid character of tested joints were established via the Eurocode 3 provisions. A numerical analysis of this type of truss, in which this semi-rigid behaviour is taken into account using the experimental results, is performed in order to demonstrate the improvement of load capacity in comparison with the classical assumptions. Finally, a semianalytical method combined with FEM simulations, calibrated via some experimental results, is proposed, in order to carry out a parametric study on the local behaviour of this type of connection. (C) 1998 Elsevier Science Ltd All rights reserved.

引用

页码：273 / 287

页数：15

共 50 条

[41] Application of component method for bolted cold-formed steel joints [J].

Nagy, Zs. ;

Stratan, A. ;

Dubina, D. .

STEEL - A NEW AND TRADITIONAL MATERIAL FOR BUILDING, 2006, :207-+

[42] Component method in the strength evaluation of cold-formed steel joints [J].

Bucmys, Zilvinas ;

Daniunas, Alfonsas .

MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES, 2017, 172 :143-148

[43] Theoretical analysis of cold-formed stainless steel tubular joints [J].

Feng, Ran ;

Young, Ben .

ENGINEERING STRUCTURES, 2015, 83 :99-115

[44] Channel frames with semi-rigid joints [J].

Tan, SH .

COMPUTERS & STRUCTURES, 2001, 79 (07) :715-725

[45] Modeling of semi-rigid composite joints [J].

Wright, HD ;

Wang, YJ ;

Cairns, R .

ADVANCES IN STRUCTURES, VOLS 1 AND 2, 2003, :745-750

[46] Genetic algorithm optimization of composite and steel endplate semi-rigid joints [J].

Ramires, Fernando Busato ;

Lopes de Andrade, Sebastiao Arthur ;

Goncalves da Silva Vellasco, Pedro Colmar ;

Ornelas de Lima, Luciano Rodrigues .

ENGINEERING STRUCTURES, 2012, 45 :177-191

[47] ON THE COLUMNS BUCKLING LENGTH OF UNBRACED STEEL FRAMES WITH SEMI-RIGID JOINTS [J].

Krystosik, P. .

ARCHIVES OF CIVIL ENGINEERING, 2021, 67 (01) :539-556

[48] Modelling of Semi-Rigid Joints in Steel-Concrete Composite Frames [J].

Jeyarajan, S. ;

Liew, J. Y. Richard ;

Koh, C. G. .

Composite Construction in Steel and Concrete VII, 2016, :422-437

[49] Experimental and numerical model for space steel and composite semi-rigid joints [J].

Dabaon, Mohamed A. ;

El-Boghdadi, Mahmoud H. ;

Kharoob, Omnia F. .

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2009, 65 (8-9) :1864-1875

[50] Damage and failure of semi-rigid steel joints during progressive collapse [J].

Fan, Jian ;

Wu, Zhifeng ;

Liu, Jiahong ;

Wang, Yixuan ;

Zheng, Huadong ;

Tee, Kong Fah .

STRUCTURES, 2023, 58

← 1 2 3 4 5 →