Cold-formed steel trusses with semi-rigid joints

被引：24

作者：

Dubina, D ^{[1
]}

Zaharia, R ^{[1
]}

机构：

[1] Politehn Univ Timisoara, Dept Steel Struct & Struct Mech, RO-1900 Timisoara, Romania

来源：

THIN-WALLED STRUCTURES | 1997年 / 29卷 / 1-4期

关键词：

D O I：

10.1016/S0263-8231(97)00028-1

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

An experimental research program aiming to evaluate the semi-rigid behaviour of some typical bolted connections, that are used in cold-formed steel plane truss joints, was carried out in the Laboratory of CMMC Department of The 'Politehnica' University of Timisoara. From the experimental values of the resistant moment and initial stiffness of the joints, the semi-rigid character of tested joints were established via the Eurocode 3 provisions. A numerical analysis of this type of truss, in which this semi-rigid behaviour is taken into account using the experimental results, is performed in order to demonstrate the improvement of load capacity in comparison with the classical assumptions. Finally, a semianalytical method combined with FEM simulations, calibrated via some experimental results, is proposed, in order to carry out a parametric study on the local behaviour of this type of connection. (C) 1998 Elsevier Science Ltd All rights reserved.

引用

页码：273 / 287

页数：15

共 50 条

[21] Novel pin jointed moment connection for cold-formed steel trusses [J].

Mathison, Chris ;

Roy, Krishanu ;

Clifton, G. Charles ;

Ahmadi, Amin ;

Masood, Rehan ;

Lim, James B. P. .

STEEL AND COMPOSITE STRUCTURES, 2019, 31 (05) :453-467

[22] Novel pin-jointed connection for cold-formed steel trusses [J].

Mathieson, Chris ;

Clifton, G. Charles ;

Lim, James B. P. .

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2016, 116 :173-182

[23] Behavior and design for component and system of cold-formed steel roof trusses [J].

Reda, M. ;

Sharaf, T. ;

ElSabbagh, A. ;

ElGhandour, M. .

THIN-WALLED STRUCTURES, 2019, 135 :21-32

[24] THE DESIGN OF BOLTED JOINTS IN COLD-FORMED STEEL SECTIONS [J].

BRYAN, ER .

THIN-WALLED STRUCTURES, 1993, 16 (1-4) :239-262

[25] Cold-formed steel joints with partial warping restraint [J].

Selyantsev, I. M. ;

Tusnin, A. .

MAGAZINE OF CIVIL ENGINEERING, 2021, 101 (01)

[26] Review on Composite Joints for Cold-Formed Steel Structures [J].

Amsyar, Faisal ;

Tan, Cher Siang ;

Ma, Chau Khun ;

Sulaiman, Arizu .

INTERNATIONAL CONFERENCE ON CIVIL AND ENVIRONMENTAL ENGINEERING (ICCEE 2018), 2018, 65

[27] Nonlinear seismic analysis of steel frame with semi-rigid joints [J].

Krolo, Paulina ;

Causevic, Mehmed ;

Bulic, Mladen .

GRADEVINAR, 2015, 67 (06) :573-583

[28] 05.37: On stability of unbraced steel frames with semi-rigid joints [J].

Krystosik, Przemys&lstrok;aw (krystosik@wilsig.tu.koszalin.pl), 1600, John Wiley and Sons Inc (01) :2-3

[29] A simplified method for the analysis of steel frames with semi-rigid joints [J].

Graham, John .

Structural Engineer, 2011, 89 (02) :29-34

[30] Direct analysis of steel frames with asymmetrical semi-rigid joints [J].

Chan, Jake L. Y. ;

Lo, S. H. .

STEEL AND COMPOSITE STRUCTURES, 2019, 31 (01) :99-112

← 1 2 3 4 5 →