Three-phase effective contact angle in a model pore

We consider a model pore (2D) in which a sharp interface between two fluids contact a third fluid which wets the solid boundary. If the configuration is capillary dominated, the geometry can be determined analytically in terms of the effective contact angle. This angle depends not only on the interfacial tensions, but also on the capillary pressures. However, if the height of the cusp formed by the wetting fluid is much smaller than the pore width, the effective contact angle is a simple function of the interfacial tensions. It turns out to be the same function as in the case of an undeformed wetting layer of molecular thickness. The analytical expression for the effective contact angle has been confirmed by a numerical technique, known as the lattice-Boltzmann method. This method, in turn, has been validated with Neumann's law for the three-phase contact angles.