Effect of temperature on the fracture behavior of polyamide 12 and glass-filled polyamide 12 processed by selective laser sintering

被引：57

作者：

Cano, A. J. ^{[1
]}

Salazar, A. ^{[1
]}

Rodriguez, J. ^{[1
]}

机构：

[1] Univ Rey Juan Carlos, DIMME, Grp Durabilidad & Integridad Mecan Mat Estruct, C Tulipan S-N, Madrid 28933, Spain

来源：

ENGINEERING FRACTURE MECHANICS | 2018年 / 203卷

关键词：

Selective laser sintering; Polyamide; 12; Fracture toughness; MECHANICAL-PROPERTIES; COMPOSITES; NYLON-12; PARTS;

D O I：

10.1016/j.engfracmech.2018.07.035

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The influence of the orientation and of the temperature on the mechanical properties of the polyamide 12 (PA12) and the polyamide 12 reinforced with glass beads processed via Selective Laser Sintering was analyzed. Tensile and fracture tests were performed at -50 degrees C, 23 degrees C and 50 degrees C with applied load perpendicular and parallel to the layered structure. The fracture resistance of PA12 was higher than that of the composite due to the poor adhesion of the glass beads to the matrix. The fracture behavior of the composite was unaffected by the temperature and the orientation. J(IC) values of PA12 were similar at -50 degrees C and at 23 degrees C and much lower than at 50 degrees C. The anisotropy was relevant during the stable crack growth.

引用

页码：66 / 80

页数：15

共 31 条

[21]

Mousa AA, 2014, JORDAN J MECH IND EN, V8, P265

[22]

Paesano A., 2016, BOEING TECH J, P1

[23] The role of notching damage on the fracture parameters of ethylene-propylene block copolymers [J].

Salazar, A. ;

Segovia, A. ;

Martinez, A. B. ;

Rodriguez, J. .

POLYMER TESTING, 2010, 29 (07) :824-831

[24] Mechanical properties of PA6/PA12 blend specimens prepared by selective laser sintering [J].

Salmoria, G. V. ;

Leite, J. L. ;

Vieira, L. F. ;

Pires, A. T. N. ;

Roesler, C. R. M. .

POLYMER TESTING, 2012, 31 (03) :411-416

[25] Microstructural and mechanical characterization of PA12/MWCNTs nanocomposite manufactured by selective laser sintering [J].

Salmoria, Gean V. ;

Paggi, Rodrigo A. ;

Lago, Alexandre ;

Beal, Valter E. .

POLYMER TESTING, 2011, 30 (06) :611-615

[26] Additive Manufacturing: Polymers applicable for Laser Sintering (LS) [J].

Schmid, Manfred ;

Wegener, Konrad .

INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016, 2016, 149 :457-464

[27] Effect of water conditioning on the fracture behavior of PA12 composites processed by selective laser sintering [J].

Seltzer, Rocio ;

Martin de la Escalera, Federico ;

Segurado, Javier .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (22-23) :6927-6933

[28] A Round Robin study for Selective Laser Sintering of polyamide 12: Microstructural origin of the mechanical properties [J].

Stichel, Thomas ;

Frick, Thomas ;

Laumer, Tobias ;

Termer, Felix ;

Hausotte, Tino ;

Merklein, Marion ;

Schmidt, Michael .

OPTICS AND LASER TECHNOLOGY, 2017, 89 :31-40

[29] On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering [J].

Van Hooreweder, Brecht ;

Moens, David ;

Boonen, Rene ;

Kruth, Jean-Pierre ;

Sas, Paul .

POLYMER TESTING, 2013, 32 (05) :972-981

[30] Effects of processing on microstructure and properties of SLS Nylon 12 [J].

Zarringhalam, H. ;

Hopkinson, N. ;

Kamperman, N. F. ;

de Vlieger, J. J. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 435 :172-180

← 1 2 3 4 →