Final acceptance tests of helium refrigerator for Wendelstein 7-X

被引：4
|
作者：
Dhard, C. P. [1 ]
Nagel, M. [1 ]
Raatz, S. [1 ]
Nuesslein, U. [2 ]
Ressel, M. [2 ]
机构：
[1] Max Planck Inst Plasma Phys, Teilinst Greifswald, Wendelsteinstr 1, D-17491 Greifswald, Germany
[2] Linde Kryotech AG, CH-8422 Pfungen, Switzerland
来源：
PROCEEDINGS OF THE 25TH INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE AND INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE 2014 | 2015年 / 67卷
关键词：
Helium refrigerator; Wendelstein; 7-X; Cryogenics for fusion; Cold circulator; Cold compressor;
D O I：
10.1016/j.phpro.2015.06.015
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
Following successful installation and commissioning, final acceptance tests were carried out on the helium refrigerator for Wendelstein 7-X. The tests were carried out for the normal operating modes i.e. peak power mode (3.4 K), standard mode (3.9 K), short standby mode (< 10 K) and long standby mode (< 100 K). Besides the normal modes, the transient modes including, cool-down and warm-up, auto interchanging between various modes and the purging modes were tested. In addition, the handling of quench, emergency signals such as cryostat vacuum break, utility failure, alarm and trip signals were checked. (C) 2015 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码：83 / 88
页数：6
相关论文
共 50 条
  • [1] Refrigerator operation during commissioning and first plasma operations of Wendelstein 7-X
    Dhard, Chandra Prakash
    Nagel, Michael
    Bau, Holger
    Raatz, Sylvio
    Meyer, Uwe
    Rummel, Thomas
    FUSION ENGINEERING AND DESIGN, 2017, 123 : 111 - 114
  • [2] Cryotechnology for Wendelstein 7-X
    Schauer, F
    Bau, H
    Bozhko, Y
    Brockmann, R
    Nagel, M
    Pietsch, M
    Raatz, S
    FUSION ENGINEERING AND DESIGN, 2003, 66-68 : 1045 - 1048
  • [3] Final integration, commissioning and start of the Wendelstein 7-X stellarator operation
    Bosch, H. -S.
    Brakel, R.
    Braeuer, T.
    Bykov, V.
    van Eeten, P.
    Feist, J. -H.
    Fuellenbach, F.
    Gasparotto, M.
    Grote, H.
    Klinger, T.
    Laqua, H.
    Nagel, M.
    Naujoks, D.
    Otte, M.
    Risse, K.
    Rummel, T.
    Schacht, J.
    Spring, A.
    Pedersen, T. Sunn
    Vilbrandt, R.
    Wegener, L.
    Werner, A.
    Wolf, R. C.
    Baldzuhn, J.
    Biedermann, C.
    Braune, H.
    Burhenn, R.
    Hirsch, M.
    Hoefl, U.
    Knauer, J.
    Kornejew, P.
    Marsen, S.
    Stange, T.
    Mora, H. Trimino
    NUCLEAR FUSION, 2017, 57 (11)
  • [4] The WENDELSTEIN 7-X mechanical structure support elements: Design and tests
    Gasparotto, M
    Elio, F
    Heinemann, B
    Jaksic, N
    Mendelevitch, B
    Simon-Weidner, J
    Streibl, B
    FUSION ENGINEERING AND DESIGN, 2005, 74 (1-4) : 161 - 165
  • [5] ICRF heating for Wendelstein 7-X
    Wesner, F
    Hartmann, DA
    Birus, D
    Braun, F
    Wendorf, J
    FUSION ENGINEERING AND DESIGN, 2003, 66-68 : 561 - 566
  • [6] Design and construction of WENDELSTEIN 7-X
    Wanner, M
    Feist, JH
    Renner, H
    Sapper, J
    Schauer, F
    Schneider, H
    Erckmann, V
    Niedermeyer, H
    FUSION ENGINEERING AND DESIGN, 2001, 56-57 : 155 - 162
  • [7] Status of Wendelstein 7-X construction
    Wegener, L.
    FUSION ENGINEERING AND DESIGN, 2009, 84 (2-6) : 106 - 112
  • [8] Project control of WENDELSTEIN 7-X
    Bünde, R
    Gottschewsky, M
    Heinrich, S
    FUSION ENGINEERING AND DESIGN, 2001, 58-59 : 803 - 808
  • [9] Quality management for WENDELSTEIN 7-X
    Feist, JH
    Bramow, HJ
    Bräuer, T
    Gliege, G
    Kamionka, U
    Krause, B
    Pieger-Frey, M
    Wanner, M
    FUSION ENGINEERING AND DESIGN, 2001, 58-59 : 809 - 813
  • [10] The layout of the WENDELSTEIN 7-X magnet
    Sapper, J
    Gardebrecht, W
    Kerl, F
    Schoenewolf, I
    FUSION ENGINEERING AND DESIGN, 2001, 58-59 : 237 - 240
12345