Characterization of a Medium Mn-Ni Steel Q&P Treated by a High Partitioning Temperature Cycle

被引:4
作者
Arribas, Maribel [1 ]
Del Molino, Eider [1 ,2 ]
Gutierrez, Teresa [1 ]
Arlazarov, Artem [3 ]
Martin, David [4 ]
De Caro, Daniele [5 ]
Ayenampudi, Sudhindra [6 ]
Santofimia, Maria J. [6 ]
机构
[1] Tecnalia, Basque Res & Technol Alliance BRTA, Parque Cient & Tecnol Bizkaia,Astondo Bidea 700, Derio 48160, Spain
[2] Univ Basque Country, Dept Min Met & Mat Sci, Plaza Torres Quevedo 1, Bilbao 48013, Spain
[3] ArcelorMittal Maizieres Res SA, Voie Romaine BP30320, F-57283 Maizieres Les Metz, France
[4] Swerim AB, Isafjordsgatan 28A, S-16440 Stockholm, Sweden
[5] Ctr Ric Fiat, Corso Settembrini 40,Porta 8,Corpo 1, I-10135 Turin, Italy
[6] Delft Univ Technol, Dept Mat Sci & Engn, Mekelweg 2, NL-2628 CD Delft, Netherlands
关键词
quenching and partitioning; medium Mn steels; austenite reverse transformation; austenite stability; RETAINED AUSTENITE; MECHANICAL-PROPERTIES; MARTENSITE-TRANSFORMATION; INTERFACE MIGRATION; THERMAL-STABILITY; TENSILE BEHAVIOR; LOW-CARBON; MANGANESE; STRENGTH; MICROSTRUCTURE;
D O I
10.3390/met12030483
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this work, a medium Mn-Ni steel was treated through Quenching and Partitioning (Q&P) with a partitioning temperature (PT) of 650 degrees C, which corresponded to the start of the austenite reverse transformation (ART) phenomenon. The influence of the quenching temperature (QT) and partitioning time (Pt) on austenite stabilization and mechanical properties was investigated. A strong influence of the quenching temperature was observed. Results were compared with those obtained after a Q&P treatment with 400 degrees C partitioning temperature. The Q&P cycle with quenching to room temperature and a high partitioning temperature produced a steel with a high retained austenite (RA) volume fraction and exceptional strength-ductility balance. The analysis of the mechanical stability of the retained austenite revealed a significant stress-induced transformation. Nevertheless, the austenite, which was stable at stresses above the yield stress, provided significant TRIP-assisted ductility. Bending, hole expansion and post-stamping properties were also evaluated for the most promising conditions.
引用
收藏
页数:26
相关论文
共 67 条
  • [51] Influence of interface mobility on the evolution of austenite-martensite grain assemblies during annealing
    Santofimia, M. J.
    Speer, J. G.
    Clarke, A. J.
    Zhao, L.
    Sietsma, J.
    [J]. ACTA MATERIALIA, 2009, 57 (15) : 4548 - 4557
  • [52] Santofimia M.J., 2012, 3 INT S STEEL SCI IR, P155
  • [53] Kinetics of the partitioning of carbon and substitutional alloying elements during quenching and partitioning (Q&P) processing of medium Mn steel
    Seo, Eun Jung
    Cho, Lawrence
    De Cooman, Bruno C.
    [J]. ACTA MATERIALIA, 2016, 107 : 354 - 365
  • [54] Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite
    Shi, Jie
    Sun, Xinjun
    Wang, Maoqiu
    Hui, Weijun
    Dong, Han
    Cao, Wenquan
    [J]. SCRIPTA MATERIALIA, 2010, 63 (08) : 815 - 818
  • [55] Carbon partitioning into austenite after martensite transformation
    Speer, J
    Matlock, DK
    De Cooman, BC
    Schroth, JG
    [J]. ACTA MATERIALIA, 2003, 51 (09) : 2611 - 2622
  • [56] Influence of interface migration during annealing of martensite/austenite mixtures
    Speer, J. G.
    Hackenberg, R. E.
    Decooman, B. C.
    Matlock, D. K.
    [J]. PHILOSOPHICAL MAGAZINE LETTERS, 2007, 87 (06) : 379 - 382
  • [57] Macroscopic to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: Role of the austenite-ferrite interface
    Sun, Binhan
    Ma, Yan
    Vanderesse, Nicolas
    Varanasi, Rama Srinivas
    Song, Wenwen
    Bocher, Philippe
    Ponge, Dirk
    Raabe, Dierk
    [J]. ACTA MATERIALIA, 2019, 178 : 10 - 25
  • [58] Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions
    Sun, Binhan
    Fazeli, Fateh
    Scott, Cohn
    Guo, Baoqi
    Aranas, Clodualdo, Jr.
    Chu, Xin
    Jahazi, Mohammad
    Yue, Stephen
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 729 : 496 - 507
  • [59] Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel
    Sun, Binhan
    Vanderesse, Nicolas
    Fazeli, Fateh
    Scott, Colin
    Chen, Jianqiang
    Bocher, Philippe
    Jahazi, Mohammad
    Yue, Stephen
    [J]. SCRIPTA MATERIALIA, 2017, 133 : 9 - 13
  • [60] EFFECT OF STRUCTURE ON DEFORMATION OF AS-QUENCHED AND TEMPERED MARTENSITE IN AN FE 0.2 PCT C ALLOY
    SWARR, T
    KRAUSS, G
    [J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1976, 7 (01): : 41 - 48